- Edmonton Stock: 18
4 lm LED step light · 120V · 3000K · dome faceplate, black finish · WAC Lighting WL-LED110-C-BK
What this product is for
This 120V LED step light is used for low-level wayfinding and safety lighting on exterior or interior steps, stair risers, retaining walls, and architectural wall details. It provides a soft 3000K light output with a full cut-off dome profile to direct light downward and reduce glare.
Use for
Use for stairways, walkways, landings, wall niches, and perimeter lighting where a small marker light is preferred over a higher-output fixture. It is commonly used where electricians need a clean, flush appearance with no visible hardware and line-voltage 120V wiring.
Avoid for
Avoid using this fixture where broad area illumination or high light levels are required. With 4 delivered lumens, it is intended for marker and accent use rather than primary pathway or security lighting.
Best for
Best for residential and light commercial step lighting where warm white output, low glare, and a compact architectural look matter. It also suits projects where maintenance access is important, thanks to the magnetized design.
Installed in
Typically installed in stair risers, masonry walls, landscape walls, and finished wall surfaces in outdoor or indoor locations. The die-cast corrosion-resistant aluminium alloy housing is suited to weather-exposed applications.
Why this product exists
This product exists to provide safe, low-level navigation lighting without the brightness and spill of larger wall fixtures. For step-lighting applications, a low-lumen fixture like this is typically chosen to mark elevation changes and edges rather than light the full walking surface. Actual lighting effect depends on mounting height, spacing, surface reflectance, and site conditions.
Compared with similar products
Compared with larger integrated wall lights, this model is designed for subtle illumination and visual comfort. Compared with low-voltage step lights, this version is built for 120V line-voltage installations and includes ELV dimming from 100% to 10%.
Specifications
- Manufacturer part number: WL-LED110-C-BK
- Brand: WAC Lighting
- Product type: LED step and wall light
- Voltage: 120 VAC, 50/60 Hz
- Delivered lumens: 4 lm
- Colour temperature: 3000K
- CRI: 90
- Power: 3.5 W
- Dimming: ELV, 100% to 10%
- Rated life: 50,000 hours
- Construction: Die-cast corrosion-resistant aluminium alloy
- Finish: Black on aluminium
- Design: Dome profile with full cut-off illumination
- Installation feature: Magnetized design for easier installation and maintenance
- Application: Interior or exterior step, wall, and pathway marker lighting
- Volts120V
- Watts4W
- FinishBlack
- Light SourceLED
- Lumens4
- LED Color Temperature3000K
- DimmableYes
- MountingRecessed
- Width5"
- Height3.125"
- RatingsIP66
- BrandWac Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
PVC FD conduit outlet box · 1-gang deep blank · no hub, lug mount · Royal RFD
RFD
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory11 – Loyalty Rewards- Edmonton Stock: 50









