Weatherproof 1-Gang Toggle Switch Cover · PVC · Grey · Royal RWTG15/10
RWTG15/10
12
– Loyalty Rewards
PVC FD conduit outlet box · 1-gang deep blank · no hub, lug mount · Royal RFD
1-gang deep blank FD PVC conduit outlet box for rigid PVC conduit systems, with no factory hub openings so entries can be drilled on site to suit the application. Commonly used where hub location flexibility matters; actual suitability depends on box fill, fittings, and local electrical code.
What this product is for
This 1-gang deep blank FD box is a PVC conduit outlet box for rigid PVC conduit systems. It is used where you need a weather-resistant non-metallic conduit box body and want to drill entry points on site instead of using a pre-hubbed box.
Use for
Use for junctions, device box layouts, and conduit terminations in commercial, residential, industrial, and institutional installations using rigid PVC conduit. The blank no-hub design is commonly chosen when conduit entry direction needs to be determined at the job site.
Avoid for
Avoid where a factory-hubbed box is required for faster repeat installations, or where metallic conduit system continuity is required. Do not assume drilled entries, fittings, or box fill are acceptable without checking the fitting method and local code requirements.
Best for
Best for electricians who need a deep single-gang PVC box with field-drilled hub flexibility. The deeper body can help when conductor space is tighter, but box fill must still be verified for the actual conductors and devices used.
Installed in
Typically installed in exposed conduit runs, service areas, utility spaces, light commercial work, and outdoor or damp-location PVC conduit systems where a compatible cover and fittings are selected. Approximate body size on similar FD deep boxes is about 6 x 2.9 x 2.9 in (150 x 73 x 73 mm).
Why this product exists
This product gives installers a non-metallic FD-style conduit box without fixed hubs, so the entry pattern can be matched to the conduit layout on site. That can reduce compromises when conduit direction varies from one installation to another.
Compared with similar products
Compared with FS-style boxes, an FD box provides a deeper body for added wiring space. Compared with pre-hubbed PVC boxes, this blank version offers more flexibility because openings are drilled where needed. Typical guidance only: choose blank no-hub boxes when conduit routing is not fully standardized before installation. Actual performance depends on installation conditions, fittings, layout, and local electrical code.
Specifications
- Type: FD conduit outlet box
- Configuration: Blank, no hub
- Gang: 1-gang
- Depth: Deep, approximately 2.75 in (70 mm)
- Mounting: Lug mount, includes mounting lugs
- Material: PVC
- Colour: Gray
- Conduit compatibility: Rigid PVC conduit systems
- Series: FD Series
- Standards: UL 514C; CSA C22.2 No. 18.2/85
- Manufacturer part number: RFD
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC FactoryWeatherproof duplex receptacle cover plate · 1-gang · white PVC flip cover · Royal RWDR15/10
RWDR15/10
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory12 – Loyalty RewardsWeatherproof Toggle Switch Cover · 1-Gang PVC · Red External Lever · Royal RVSC15/10
RVSC15/10
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory25 – Loyalty Rewards- Edmonton Stock: 5
Rigid PVC Duct Solvent Cement · 250 mL · EcoVOC Clear Formula · Royal RVOC250
RVOC250
22 – Loyalty RewardsBlank Cover Plate · 1-Gang PVC · With Gasket · Royal Pipe RBRC15-10
RBRC15-10
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory3 – Loyalty Rewards- Edmonton Stock: 13
- Edmonton Stock: 58
- Edmonton Stock: 3
- Edmonton Stock: 20
