- Edmonton Stock: 24
:
from
to
Clear
Clear
Square steel stud box · 4 in x 4 in x 1-1/2 in, 21 cu in · wraparound steel stud bracket · 52151KSSX
SKU: 52151KSSX
4 in x 4 in x 1-1/2 in (102 x 102 x 38 mm) galvanized steel square box for new-work steel stud installations. This 21 cu in box uses a wraparound steel stud bracket and concentric 1/2 in and 3/4 in knockouts, making it a typical choice for junctions and device covers in commercial and residential wall assemblies.
Delivered to you by Aug 17 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This 4 in x 4 in x 1-1/2 in (102 x 102 x 38 mm) square steel stud box is used for new-work branch circuit rough-in where a metal box must be mounted directly to a steel stud. It provides 21 cu in of wiring space and accepts covers and mud rings sized for standard 4 in square boxes.
Use for
Use for junctions, conduit runs, armoured cable terminations where permitted by the box and fitting selection, and device installations with the correct raised cover or mud ring. Commonly used in commercial tenant fit-outs, multi-residential projects, and steel stud partition walls.
Avoid for
Avoid where a deeper box is needed for larger conductor fill, bulky splices, or device combinations that exceed 21 cu in capacity. Do not use without confirming box fill, support method, fitting compatibility, and local code requirements.
Best for
Best for electricians who need a shallow 4 in square box with an integral steel stud bracket for faster alignment on steel stud walls. It is a practical choice when standard 4 in square covers and accessories are already being used on the job.
Installed in
Typically installed in interior steel stud walls using the wraparound bracket. Distributor and catalogue references indicate this style is commonly used on 2-1/2 in and 3-5/8 in steel studs. Actual fit and finished wall alignment depend on stud type, wall build-up, bracket style, and installation method.
Why this product exists
This box combines standard 4 in square box capacity with a factory-attached steel stud support, reducing the need for separate brackets in new-work framing. The shallow 1-1/2 in depth helps where wall space is limited while still supporting many common junction and cover configurations.
Compared with similar products
Compared with a deeper 2-1/8 in box, this 1-1/2 in version takes less wall depth but offers less conductor space. Compared with a plain 4 in square box, the attached steel stud bracket can simplify mounting in steel stud partitions. As a rule of thumb, choose the deeper box when conductor count, fittings, or device volume may push box fill limits. Actual capacity requirements depend on conductor size, device count, grounding, and local electrical code.
Specifications
- Product type: Square steel stud electrical box
- Box size: 4 in x 4 in x 1-1/2 in (102 x 102 x 38 mm)
- Capacity: 21 cu in
- Material: Galvanized steel
- Mounting: Integral wraparound steel stud bracket
- Application: New work
- Knockouts: Concentric 1/2 in and 3/4 in knockouts
- Grounding: Raised ground screw provision listed in catalogue source
- Cover included: No
- Gang4" X 4"
- ColourGalvanized
- Used InSteel Stud
- Capacity21 Cubic Inch
- Similar ToCI52151-KSSX
- BrandWhite Label
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 553
- Edmonton Stock: 13
- Edmonton Stock: 729
- Edmonton Stock: 528
- Edmonton Stock: 921
- Edmonton Stock: 10
- Edmonton Stock: 119
- Edmonton Stock: 1390
- Edmonton Stock: 704
