- Edmonton Stock: 24
:
from
to
Clear
Clear
2-Gang steel stud device box · 2-1/2 in deep, 25 cu in, non-gangable, cable clamps · wraparound bracket for 2-1/2 in and 3-5/8 in steel studs · Vista CI2104-LSSA-2X
SKU: 2104LSSA2X
Non-gangable 2-gang steel stud device box with integral cable clamps and a wraparound bracket for 2-1/2 in and 3-5/8 in steel studs. The 25 cu in capacity suits typical switch and receptacle rough-in where a steel stud mounting box is required.
Delivered to you by Jul 26 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This 2-gang steel device box is used for rough-in on steel stud walls where you need a fixed, non-gangable metal box for switches, receptacles or similar wiring devices. It includes cable clamps and a wraparound bracket for common steel stud depths.
Use for
- 2-gang switch and receptacle installations
- Steel stud wall construction
- Armoured cable and nonmetallic sheathed cable entries through integral clamps
- Commercial, institutional and residential rough-in where a metal device box is specified
Avoid for
- Applications requiring a gangable box layout
- Installations where a masonry box, octagon box or 4 in square box is the correct form factor
- Jobs needing conduit knockouts instead of cable clamp style entries
Best for
Best for electricians roughing in device locations on 2-1/2 in (64 mm) or 3-5/8 in (92 mm) steel studs and wanting a ready-to-mount 2-gang box with built-in cable clamping. This format is commonly chosen where consistent box depth and bracket alignment matter more than field gangability.
Installed in
Typically installed in steel stud partition walls in commercial tenant fit-outs, multi-residential projects, schools, offices and similar interior framed wall assemblies.
Why this product exists
It provides a straightforward way to mount a 2-gang metal device box on steel studs without adding separate support hardware. The non-gangable body helps maintain box rigidity, while the integral clamps simplify cable entry for common rough-in methods.
Compared with similar products
Compared with gangable device boxes, this non-gangable version offers a fixed 2-gang format and factory-formed support arrangement. Compared with knockout-style boxes, this model is better suited to cable-based rough-in rather than conduit entry. Typical buying check: match the box style to the wiring method, stud depth and device count before ordering.
Rule of thumb: steel stud device boxes like this are commonly used where flush device mounting and repeatable bracket positioning are needed. Actual suitability depends on cable type, wall assembly, plaster ring or cover selection, and local electrical code.
Specifications
- Brand: Vista
- Manufacturer: ABB
- Manufacturer part number: CI2104-LSSA-2X
- Product type: Steel stud device box
- Gang: 2-gang
- Construction: Non-gangable steel box
- Depth: 2-1/2 in (64 mm)
- Box size: 3 in high x 3-3/4 in wide x 2-1/2 in deep (76 x 95 x 64 mm)
- Capacity: 25 cu in
- Mounting: Wraparound bracket for 2-1/2 in and 3-5/8 in steel studs (64 mm and 92 mm)
- Cable entry: Integral clamps for armoured cable or nonmetallic sheathed cable
- Application: Device box for switches, receptacles and similar wiring devices
- Country of origin: Canada
- Gang2 Gang
- ColourGalvanized
- Used InSteel Stud
- Capacity25 Cubic Inches
- Similar ToCI2104-LSSA-2X
- BrandWhite Label
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 553
- Edmonton Stock: 1390
- Edmonton Stock: 1112
- Edmonton Stock: 528
- 12% off trade
- Edmonton Stock: 704
