- Edmonton Stock: 704
:
from
to
Clear
Clear
1-Gang Steel Device Box · 3 x 2 x 2-1/2 in. · Steel Stud Mount with EMT Knockouts · Vista 3104KSSX
SKU: 3104KSSX
1-gang steel device box for steel stud installations with EMT knockouts and approximately 16 cu. in. capacity. Commonly used for switches and receptacles where a metal box and stud-mount support are required.
Delivered to you by Aug 22 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This 1-gang steel device box is used to mount wiring devices such as switches and receptacles in steel stud walls. It is intended for branch circuit rough-in where a metal box with EMT knockouts and steel stud support is required.
Use for
Use for steel stud wall construction, EMT raceway rough-in, and standard 1-gang device installations. The 3 x 2 x 2-1/2 in. size (76 x 51 x 64 mm) and approximately 16 cu. in. capacity suit many typical switch and receptacle box-fill requirements, subject to conductor count, device size, and local code.
Avoid for
Avoid using where a non-metallic box is specified, where extra device volume is needed beyond the box capacity, or where the wall assembly and device layout require a different bracket style or box depth.
Best for
Best for commercial and institutional steel stud framing jobs, tenant fit-ups, and other installations where electricians want a metal 1-gang box with integrated steel stud mounting and conduit knockouts.
Installed in
Typically installed in steel stud partition walls in offices, retail spaces, corridors, service rooms, and similar light commercial interiors across Canada.
Why this product exists
This box provides a straightforward way to mount a 1-gang device in steel stud construction while aligning with EMT wiring methods. The steel construction, stud-mount support, and knockouts help simplify rough-in for metal-framed walls.
Compared with similar products
Compared with standard device boxes without stud brackets, this style is better suited to steel stud installations. Compared with deeper or larger gang boxes, it is a more typical choice when only one device is needed and wall space is limited. Box-fill suitability is a typical selection factor; actual conductor allowance depends on device configuration and applicable electrical code.
Specifications
- Product type: 1-gang steel device box
- Brand: Vista
- Manufacturer part number: 3104KSSX
- Material: Steel
- Mounting: Steel stud mount
- Knockouts: EMT knockouts
- Box size: 3 x 2 x 2-1/2 in. (76 x 51 x 64 mm)
- Capacity: approximately 16 cu. in. (262 cm³)
- Application: Switch and receptacle device mounting in steel stud walls
- Country note: Made or assembled in Canada on related Vista catalogue listings
Typical guidance only: actual box-fill, support suitability, and installation compliance depend on conductor count, device type, wall assembly, and local electrical code.
- Gang1 Gang
- ColourGalvanized
- Used InSteel Stud
- Capacity16 Cubic Inches
- Similar ToCI3104-KSSX
- BrandWhite Label
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 1112
- Edmonton Stock: 553
- Edmonton Stock: 1390
- Edmonton Stock: 13
- Edmonton Stock: 729
- Edmonton Stock: 528
- Edmonton Stock: 921
- Edmonton Stock: 10
- Edmonton Stock: 23
