- Edmonton Stock: 24
1-Gang Gangable Steel Stud Device Box · 3 x 2 x 2-1/2 in · Wraparound Bracket with Cable Clamps · Vista 3104LSSAX
What this product is for
This 1-gang gangable steel device box is used for rough-in on steel stud walls in residential, commercial, and institutional construction. It provides a metal enclosure for wiring devices such as switches and receptacles where a wraparound steel-stud bracket is required.
Use for
Use for new-work installations on steel studs, typically 2-1/2 in and 3-5/8 in stud applications depending on the bracket style used by the manufacturer listing. It is suited to single-device rough-in where integrated cable clamps and a gangable design help with standard branch-circuit device installations.
Avoid for
Avoid using this box where a non-metallic box is specified, where old-work/remodelling ears are needed, or where conduit knockout requirements differ from the actual box configuration being supplied. Do not assume compatibility with every cable type or wall assembly without checking the listing and local electrical code.
Best for
Best for electricians roughing in switches and receptacles on steel stud framing where a compact 3 x 2 in device box and wraparound support bracket are preferred. The gangable format is useful when adjacent boxes may be needed in multi-device layouts.
Installed in
Typically installed in steel stud partition walls in commercial tenant fit-outs, multi-residential projects, and other framed wall assemblies. The box size is 3 x 2 x 2-1/2 in (approximately 76 x 51 x 64 mm).
Why this product exists
This style of box exists to simplify device-box mounting on steel studs while providing the strength and grounding continuity of a metallic box. Integrated clamps and bracket support help speed rough-in compared with field-adapted mounting methods.
Compared with similar products
Compared with non-gangable boxes, this model is intended for applications where modular expansion may be needed. Compared with wood-stud nail-on boxes, the wraparound bracket is designed specifically for steel stud framing. As a typical trade rule of thumb, deeper or larger boxes may be preferred when conductor count, device size, or splicing volume increases; actual box-fill compliance depends on conductor count, device yokes, fittings, and local code.
Specifications
- Product type: 1-gang gangable steel device box
- Material: Galvanized steel
- Application: New work
- Mounting: Wraparound bracket for steel stud installation
- Size: 3 x 2 x 2-1/2 in (76 x 51 x 64 mm)
- Capacity: approximately 16 cu in (about 262 mL / 260 cm³, source variations)
- Cable entry: Integrated cable clamps; listings indicate NMD90/Loomex and AC90 compatibility on equivalent catalogue references
- Support features: Integral support bracket
- Configuration: Single gang, gangable
- Certifications: Listings on equivalent manufacturer sheets indicate cETLus or cULus and CSA certification; confirm on supplied product packaging before installation
Specification details can vary slightly by source and suffix. Confirm the exact clamp style, pryout/knockout configuration, and certification marking on the delivered box before ordering for a code-specific job.
- Gang1 Gang
- ColourGalvanized
- Used InSteel Stud
- Capacity16 Cubic Inches
- Similar ToCI3104-LSSAX
- BrandWhite Label
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 1108
- 2% off trade
- Edmonton Stock: 1384
- 2% off trade
- Edmonton Stock: 704
- 2% off trade
- Edmonton Stock: 13
- Edmonton Stock: 729
- Edmonton Stock: 498
- Edmonton Stock: 920
- 2% off trade
- Edmonton Stock: 10
- Edmonton Stock: 120















