- Edmonton Stock: 13
3-Gang Steel Stud Device Box · 37.5 cu in · Integral Cable Clamps · Vista 2104LSSA3X
What this product is for
This 3-gang steel device box is used for rough-in where multiple wiring devices need to be mounted in a wall with steel stud framing. It is designed for switches, receptacles and similar device installations requiring a pre-ganged metal box.
Use for
Use for 3-gang device installations in steel stud walls, including commercial tenant fit-outs, residential multi-unit work, and renovation projects using 2-1/2 in or 3-5/8 in steel studs. Integral cable clamps support armoured cable and nonmetallic sheathed cable entries.
Avoid for
Avoid using this box where a single-gang or gangable box is required, where conduit knockout configurations are needed instead of cable clamps, or where box fill calculations exceed the 37.5 cu in capacity. Always confirm conductor count, device volume allowance, and local code requirements before installation.
Best for
Best for electricians who need a fixed 3-gang steel stud box with built-in cable clamping and a wraparound support bracket. It suits standard wall device layouts where speed of rough-in and consistent stud mounting matter.
Installed in
Typically installed in interior partition walls framed with 2-1/2 in (64 mm) or 3-5/8 in (92 mm) steel studs. The box size is 3 in H x 5-1/2 in W x 2-1/2 in D (approximately 76 x 140 x 64 mm).
Why this product exists
This box provides a straightforward way to mount three devices in steel stud construction without assembling multiple single-gang boxes. The integrated bracket and cable clamps help simplify rough-in for common armoured cable and sheathed cable installations.
Compared with similar products
Compared with a single-gang steel stud box, this 3-gang version provides more device space and a larger overall box volume for multi-device locations. Compared with gangable boxes, a pre-ganged box can reduce assembly time and keep spacing consistent. As typical guidance, larger multi-gang boxes can help at busy switch locations, but actual box fill acceptance depends on conductor count, device allowances, internal fittings, and local electrical code.
Specifications
- Brand: Vista
- Manufacturer part number: 2104LSSA3X
- Product type: Steel stud device box
- Gang: 3-gang
- Material: Steel
- Finish/colour: Silver
- Box depth: 2-1/2 in (64 mm)
- Box size: 3 in H x 5-1/2 in W x 2-1/2 in D (approximately 76 x 140 x 64 mm)
- Cubic capacity: 37.5 cu in
- Stud compatibility: 2-1/2 in and 3-5/8 in steel studs
- Cable entry: Integral clamps for armoured cable or nonmetallic sheathed cable
- Mounting style: Wraparound bracket with integral support bracket
- Standard: CSA 5043
- Country of manufacture/assembly: Made or assembled in Canada
- Gang3 Gang
- ColourGalvanized
- Used InSteel Stud
- Capacity37.5 Cubic Inches
- Similar ToCI2104-LSSA-3X
- BrandWhite Label
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 24
- Edmonton Stock: 553
- Edmonton Stock: 1112
- Edmonton Stock: 729
- 12% off trade
- Edmonton Stock: 1390
- Edmonton Stock: 23











