In-Wall Fan-Forced Heater · 240/208V 1500/750W · White Grill · King Electric WHF2415-W
WHF2415
349
– Loyalty Rewards
:
from
to
Clear
Clear
In-Wall Fan-Forced Heater · 240/208V 1000/750W · White Grille · King Electric WHF2410-W
SKU: WHF2410
Fan-forced in-wall heater for 240/208V applications with 1000W at 240V and 750W at 208V. Commonly used for bathrooms, apartments and small rooms where quick-response electric heat is needed; as a rule of thumb, 1000W electric heat may suit approximately 90 to 120 sq ft in a typical insulated space, but actual coverage depends on insulation, layout and local electrical code.
What this product is for
The King Electric WHF2410-W is a fan-forced in-wall heater designed for recessed wall installation in residential and light commercial spaces. It uses a NiChrome heating element and squirrel-cage blower to deliver quick-response heat in a compact wall heater format.
Use for
Use for bathrooms, apartment suites, entry areas, offices, bedrooms and other small rooms where 240/208V electric heat is specified. It is commonly selected where faster warm-up is preferred over radiant-style baseboard heating.
Avoid for
Avoid for large open areas, whole-home primary heating design without proper load calculations, or installations where wall clearances and recess mounting requirements cannot be met. Not a substitute for engineered heating layouts.
Best for
Best for retrofit or new-construction wall heating where a compact grille size and quick heat delivery matter. Also suitable where a white factory grille matches standard interior finishes.
Installed in
Typically installed recessed in framed walls in houses, condos, apartments and light commercial rooms. Manufacturer literature indicates minimum clearances of 6 in to a side wall and 4 in from the floor (approximately 152 mm and 102 mm).
Why this product exists
This heater fills the need for compact, fast-response electric wall heat without moving up to larger commercial-style units. Compared with slower convection heaters, fan-forced wall heaters are commonly chosen where occupants want heat felt sooner after call for heat.
Typical buying guidance: 1000W of electric heat is often used for approximately 90 to 120 sq ft in a reasonably insulated room. On 208V systems, output is lower than at 240V. Actual performance depends on installation conditions, insulation, layout, ceiling height and local electrical code.
Compared with similar products
Compared with baseboard heaters, this in-wall fan-forced model provides quicker air movement and faster perceived heat. Compared with higher-wattage wall heaters, this 1000W model is better suited to smaller rooms or locations with limited heating load.
Specifications
- Brand: King Electric
- Manufacturer part number: WHF2410-W
- Series: WHF
- Product type: In-wall fan-forced heater
- Voltage: 240/208V AC, single phase
- Wattage: 1000W at 240V; 750W at 208V
- Current draw: 4.2A at 240V; 3.6A at 208V
- Heat output: 3412 BTU/h maximum
- Airflow: 75 CFM
- Colour: White / bright white grille
- Construction: Steel wall heater assembly
- Grille dimensions: 13.5 in x 10 in x 4 in (approximately 343 x 254 x 102 mm)
- Minimum clearances: 6 in side wall, 4 in floor (approximately 152 mm and 102 mm)
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Available to Order | Typically Arrives in 1 - 3 Weeks- Edmonton Stock: 2
- Edmonton Stock: 2
