Built-In Thermostat Kit · 240V · Single Pole, Bright White · King Electric T-KIT-1BW
What this product is for
This built-in thermostat kit is used to add or replace integral temperature control in compatible King Electric wall heaters. It is a snap-action, single-pole thermostat kit in bright white for selected King heater series.
Use for
Use for compatible King Electric heater models including PX, KT, KTW, PAW, W and WHF where a built-in thermostat kit is specified by the manufacturer. It is suited to field installation or replacement on approved heater models.
Avoid for
Avoid using this kit on non-compatible heater brands or models, or where a double-pole thermostat is required instead of single-pole control. Do not assume fitment based on appearance alone; confirm the exact heater series and control requirement before purchase.
Best for
Best for service replacements, retrofit work and heater installations where an integrated control is preferred over a separate wall thermostat. It is a practical choice when matching an existing bright white heater finish.
Installed in
Typically installed directly in compatible in-wall fan-forced electric heaters and Pic-A-Watt heater assemblies. Typical applications include residential rooms, suites, offices and light commercial spaces using electric resistance heat.
Why this product exists
This kit provides local temperature control at the heater without adding a separate wall-mounted line-voltage thermostat. For electric unit heaters and wall heaters, matching the correct pole configuration matters for control method and shutoff behaviour.
Typical guidance only: line-voltage heater controls must be matched to the heater voltage and circuit arrangement. Actual performance and suitability depend on heater model, wiring method, installation conditions and local electrical code.
Compared with similar products
Compared with a double-pole built-in thermostat kit, this single-pole version switches one line only. Compared with a remote wall thermostat, a built-in kit keeps control at the heater and can simplify retrofit work on compatible units.
Specifications
- Manufacturer part number: T-KIT-1BW
- Brand: King Electric
- Product type: Built-in thermostat kit
- Control type: Snap-action thermostat
- Pole configuration: Single pole, single throw
- Voltage: 240V listing reference; manufacturer series information indicates TKIT single-pole kits are used on compatible 120V or 240V heaters depending on model
- Colour: Bright white
- Temperature range: approximately 40°F to 90°F (4°C to 32°C) per manufacturer model page; some distributor listings show 48°F to 80°F (9°C to 27°C), so application verification is recommended
- Installation: Field installed / replacement kit
- Compatible heater series: PX, KT, KTW, PAW, W, WHF
- Approximate dimensions from distributor listing: 3.8 in x 2 in x 2.4 in (97 mm x 51 mm x 61 mm)
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Available to Order | Typically Arrives in 1 - 3 Weeks419 – Loyalty Rewards
Wall Heater · 240/208V 500-2250W · Pic-A-Watt Multi-Watt Fan Forced · King Electric PAW2422
PAW2422
Available to Order | Typically Arrives in 1 - 3 Weeks From California USA450 – Loyalty RewardsIn-Wall Fan-Forced Heater · 240/208V 1000/750W · White Grille · King Electric WHF2410-W
WHF2410
Available to Order | Typically Arrives in 1 - 3 Weeks349 – Loyalty Rewards- Edmonton Stock: 2
Decorator Duplex Receptacle · 15A 125V 5-15R · Tamper Resistant Self-Grounding White · Hubbell RRD15SWTR
RRD15SWTR
Available to Order | Typically Arrives in 1 - 2 Weeks From Ontario Factory Warehouse1 – Loyalty Rewards










