Wall Heater · 240/208V 500-2250W · Pic-A-Watt Multi-Watt Fan Forced · King Electric PAW2422
What this product is for
The King Electric PAW2422 is a fan-forced in-wall heater for residential and light commercial spaces where you need recessed electric heat with adjustable wattage. It is part of the PAW Pic-A-Watt series and supports field-selectable outputs from 500W to 2250W on a 240/208V circuit.
Use for
Use for bedrooms, living areas, offices, condos, hallways and similar finished spaces where quiet forced-air wall heat is preferred. It is commonly selected when the electrician wants one heater platform that can be matched to room load during installation instead of stocking multiple fixed-wattage models.
Avoid for
Avoid where line voltage is not available, where a built-in thermostat is required in the base model, or where a surface-mounted unit or different enclosure configuration is needed without the proper accessories. Do not use estimated room coverage as a guaranteed sizing method.
Best for
Best for single-family residences, condominiums and similar spaces needing a recessed wall heater with selectable output, quiet operation and standard white finish options or accessory configurations. It also suits retrofit work when wattage flexibility helps reuse an existing 240/208V branch circuit.
Installed in
Installed in-wall using the appropriate can and grill configuration. Typical grille size is about 13.63 in W x 7.13 in H x 4.5 in D (346 x 181 x 114 mm), with a minimum mounting height of 4 in (102 mm) from the floor and approximately 6 in (152 mm) side clearance noted in manufacturer literature.
Why this product exists
This heater exists to give contractors one compact wall heater that can be set to several wattages in the field. That helps with room-by-room load matching, renovation work and inventory reduction while keeping the same heater family and installation style.
Compared with similar products
Compared with fixed-wattage wall heaters, the PAW2422 gives more flexibility because the output can be selected from 500, 750, 1000, 1250, 1500, 1750 or 2250W. Compared with baseboard heaters, it provides fan-forced air movement and a more compact in-wall footprint. Typical rule of thumb for electric heat is about 10W per sq ft in insulated spaces, so the higher settings are commonly used for larger rooms; actual performance depends on installation conditions, insulation, layout, ceiling height and local electrical code.
Specifications
- Brand: King Electric
- Manufacturer part number: PAW2422
- Product family: PAW Pic-A-Watt wall heater
- Type: Fan-forced in-wall electric heater
- Voltage: 240/208V
- Selectable wattages: 500 / 750 / 1000 / 1250 / 1500 / 1750 / 2250W
- Maximum current: 9.4A at 240V; dual-rated models draw approximately 13% less current and 25% less wattage at 208V
- Maximum output: 7677 BTU/h
- Airflow: approximately 75 CFM
- Grille dimensions: 13.63 in W x 7.13 in H x 0.75 in grille depth (346 x 181 x 19 mm)
- Overall depth: 4.5 in (114 mm)
- Weight: 9.5 lb (4.3 kg)
- Colour: White standard
- Construction/features: Pic-A-Watt element, squirrel cage blower, C-frame motor, Smart Limit Protection, powder-coated steel grille
- Warranty: 5-year limited
- Thermostat note: commonly paired with a line-voltage wall thermostat, sold separately
- Volts240/208V
- Watts500 to 2250W
- ColourWhite
- Square Footage50-250 Sq Feet
- BrandKing Electric Heating
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Available to Order | Typically Arrives in 1 - 3 Weeks188 – Loyalty Rewards
- Edmonton Stock: 2
Wall Heater Ultra Grill Upgrade · White · For Pic-A-Watt PAW Series Heaters · King Electric ULTRA-W
ULTRA-W
Available to Order | Typically Arrives in 1 - 3 Weeks166 – Loyalty Rewards- Edmonton Stock: 1334
- Edmonton Stock: 1050
- Edmonton Stock: 430












