In-Ground Light · 12V MR16 Bi-Pin · Brass Trim, Centennial Brass Finish · Kichler 15495CBR
What this product is for
This 12V in-ground landscape light is used for recessed outdoor accent lighting where the fixture needs to sit flush with grade. It is built for MR16 bi-pin lamps and is typically selected for uplighting trees, walls, columns, flagpoles, and other architectural or landscape features.
Use for
Use for low-voltage landscape lighting systems operating at 9-15V. Suitable for wet locations and commonly installed in planting beds, gravel areas, or other finished landscape surfaces where a compact in-ground fixture is required. Typical applications include feature uplighting and narrow accent lighting, depending on the MR16 lamp beam spread chosen.
Avoid for
Avoid where an integrated LED fixture is required, where a lamp is expected to be included, or where a broad path-and-spread distribution is needed. Also avoid applications where fixture loading, lensing, or drive-over requirements have not been confirmed for the specific installation detail.
Best for
Best for contractors and landscape installers who want a replaceable-lamp in-ground fixture in a solid brass trim style that coordinates with other Centennial Brass landscape products. A replaceable MR16 lamp format can simplify future maintenance and beam selection compared with fully integrated fixtures.
Installed in
Installed in outdoor low-voltage landscape systems in residential and light commercial settings across Canada. The visible trim is approximately 5 in diameter and the fixture height is approximately 5 in (about 127 mm x 127 mm), which helps when planning recess depth and finished grade layout.
Why this product exists
This product exists to provide a recessed, low-profile accent lighting option where above-grade spot lights are not preferred. It gives installers a way to direct light upward from grade level while using a field-selectable MR16 lamp. As a rule of thumb, lower wattage MR16 lamps are commonly used for smaller trees or tighter accent work, while lamp choice, beam angle, wire run, and transformer sizing all affect final results. Actual performance depends on installation conditions, lamp selection, voltage drop, insulation, layout, and local electrical code.
Compared with similar products
Compared with integrated LED in-ground fixtures, this model uses a replaceable MR16 bi-pin lamp, which can offer more flexibility for service and beam selection. Compared with surface-mounted accent lights, an in-ground fixture provides a cleaner finished appearance but requires more planning for drainage, placement, and service access. For low-voltage landscape systems, a typical rule of thumb is to size the transformer at total connected wattage multiplied by 1.25 and to manage voltage drop on longer runs.
Specifications
- Product type: In-ground landscape accent light
- Brand: Kichler
- Manufacturer part number: 15495CBR
- System voltage: 12V low voltage
- Operating voltage: 9-15V
- Lamp type: MR16
- Socket type: Bi-pin (BIPI)
- Lamp included: No
- Location rating: Wet rated
- Finish: Centennial Brass
- Trim material/style: Brass trim
- Approximate size: 5 in H x 5 in dia. (127 mm x 127 mm)
- Typical applications: Trees, walls, flagpoles, architectural accents
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.