In-Ground Well Light · 12V MR16 Lamp-Ready · Solid Brass Centennial Brass Finish · Kichler 15481CBR
15481CBR
229
– Loyalty Rewards
:
from
to
Clear
Clear
Rock Guard · 12V · Solid Brass with Clear Lens · Kichler 15482CBR
SKU: 15482CBR
12V solid brass rock guard and glare shield accessory for compatible Kichler in-ground fixtures, finished in Centennial Brass and supplied with an optional clear lens. Used to help protect the fixture face from debris and impact in grade-level landscape lighting installations.
What this product is for
This accessory is a solid brass rock guard and glare shield for compatible Kichler in-ground landscape fixtures. It is designed to add physical protection at the fixture opening while maintaining the Centennial Brass finish used across matching Kichler landscape products.
Use for
Use for in-ground landscape lighting where the fixture is exposed to foot traffic, loose stone, mulch, lawn equipment, or other surface debris. It is commonly used in planting beds, hardscape edges, and similar outdoor installations where added fixture-face protection is helpful.
Avoid for
Avoid using this as a universal rock guard for non-compatible fixtures or where fixture dimensions do not match. Do not treat it as a load-rated cover unless the fixture assembly is specifically rated for that application.
Best for
Best for contractors maintaining or upgrading existing Kichler Centennial Brass in-ground lighting systems and needing a matching accessory rather than replacing the full fixture.
Installed in
Installed on compatible low-voltage 12V in-ground landscape fixtures in residential and light commercial outdoor lighting systems. Typical applications include walkways, garden beds, uplighting zones, and architectural landscape features.
Why this product exists
In-ground fixtures sit at grade and are more exposed to impact and debris than above-grade landscape lights. This accessory helps protect the fixture opening and can reduce service calls caused by damaged exposed components.
Compared with similar products
Compared with a standard trim or uncovered fixture face, a rock guard adds a layer of protection for exposed in-ground installations. The brass construction and Centennial Brass finish make it a better match for Kichler brass landscape systems than generic painted accessories.
Specifications
- Manufacturer: Kichler
- Manufacturer part number: 15482CBR
- Product type: Rock guard / glare shield accessory
- Application: Compatible Kichler in-ground fixture accessory
- System voltage: 9-15V, commonly used on 12V landscape systems
- Material: Solid brass
- Finish: Centennial Brass
- Lens: Optional clear lens included
- Dimensions: 4.5 in diameter x 1 in H (approximately 114 mm diameter x 25 mm H)
- Weight: approximately 0.75 lb (0.34 kg)
Buying note: This is an accessory, not a complete fixture. Confirm fixture compatibility before ordering.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Available to Order | Typically Arrives in 1 - 3 Weeks From California USA