- Edmonton Stock: 451
In-Ground Well Light · 12V MR16 Lamp-Ready · Solid Brass Centennial Brass Finish · Kichler 15481CBR
12V low-voltage in-ground well light with solid brass construction, frosted lens, and MR16 bi-pin lamp socket. Commonly used to uplight trees, walls, and flagpoles in landscape systems; actual light output depends on the lamp selected, beam spread, transformer sizing, cable run, and installation conditions.
What this product is for
This in-ground well light is designed for 12V low-voltage landscape lighting where the fixture needs to sit flush in grade while directing light upward. It uses a replaceable MR16 bi-pin lamp, making it suitable for serviceable installations where lamp choice and beam spread may need to be adjusted over time.
Use for
Use for uplighting mature trees, stone walls, columns, flagpoles, and exterior architectural features. The frosted lens helps soften the beam and reduce glare, and the included installation sleeve supports in-ground placement, including concrete applications where permitted by the manufacturer.
Avoid for
Avoid where an integrated LED fixture is specifically required, or where a complete fixture with lamp included is needed out of the box. Also avoid using it without confirming transformer capacity, voltage drop, and lamp compatibility for the selected MR16 lamp.
Best for
Best for contractors and landscape installers who want a serviceable brass in-ground fixture with a replaceable lamp. It is a practical choice where finish longevity, field lamp selection, and future maintenance access matter.
Installed in
Typically installed in landscaped beds, hardscape edges, and concrete or masonry areas using the supplied composite sleeve. Fixture height is approximately 4.92 in (125 mm). Brass will typically develop a natural patina over time in outdoor environments.
Why this product exists
This fixture exists for low-voltage landscape projects that need a flush in-ground uplight rather than a surface-mounted accent light. A replaceable MR16 platform gives installers flexibility to choose lamp wattage, beam angle, and colour temperature based on the application.
Compared with similar products
Compared with integrated LED in-ground fixtures, this model offers easier lamp replacement and beam customisation. Compared with lower-cost composite fixtures, the solid brass body is better suited to long-term outdoor exposure. As a rule of thumb for low-voltage landscape systems, longer cable runs may require heavier cable to control voltage drop, and transformer sizing is commonly calculated at total lamp wattage multiplied by approximately 1.25. Actual performance depends on installation conditions, insulation, layout, and local electrical code.
Specifications
- Product type: Low-voltage in-ground well light
- Brand: Kichler
- Manufacturer part number: 15481CBR
- Finish: Centennial Brass
- Construction: Solid brass
- System voltage: 12V
- Lamp type: 1 x MR16 bi-pin, lamp not included
- Max lamp wattage: 20W incandescent, typical published listing
- Lens: Frosted, heat-resistant glass
- Installation: Includes composite installation sleeve
- Application notes: Driver-over and walk-over rated per distributor/manufacturer listing language
- Fixture height: approximately 4.92 in (125 mm)
- Use environment: Outdoor landscape lighting
- Volts12Vac
- FinishCentennial Brass
- Light SourceMR16
- Diameter4.75"
- Height4.75"
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Landscape Accent Light · 12V MR16 · Textured Architectural Bronze · Kichler 15374AZT
15374AZT
Available to Order | Typically Arrives in 1 - 3 Weeks From California USA159 – Loyalty Rewards- Edmonton Stock: 7
