- Edmonton Stock: 1103
:
from
to
Clear
Clear
Spot Light · 12V MR16 Accent Fixture · Centennial Brass · Kichler 15475CBR
SKU: 15475CBR
12V low-voltage MR16 accent fixture for landscape uplighting, finished in Centennial Brass. Commonly used to highlight trees, statuary, and textured walls; actual light output and beam spread depend on the lamp selected and installation layout.
What this product is for
This 12V low-voltage landscape spot light is used for directional accent lighting in outdoor installations. It is designed for uplighting trees, statuary, columns, textured walls, and other focal points where a replaceable MR16 lamp is preferred.
Use for
Use for landscape lighting systems operating at 9-15V, especially where you want lamp choice flexibility for beam spread, colour temperature, and output. It suits residential and light commercial exterior projects that use MR16 Bi-Pin lamps.
Avoid for
Avoid where an integrated LED fixture is required, or where a wide wall-wash distribution is needed from a single fixture. It is also not the right choice if you need a complete fixture-and-lamp package with fixed lumen output specified at the fixture level.
Best for
Best for contractors and landscape installers who want a serviceable brass accent fixture with replaceable lamp options. For low-voltage landscape systems, replaceable lamp fixtures are often preferred when future maintenance access and beam changes matter.
Installed in
Typically installed in garden beds, around trees, along foundation planting, and near architectural features. The fixture body is approximately 5.25 in long (133 mm) and 2.25 in wide x 2.25 in high (57 x 57 mm), which helps when planning stake-mounted placement in tighter landscape areas.
Why this product exists
This fixture provides a brass-bodied, wet-rated accent light platform for 12V landscape systems while allowing the installer to choose the MR16 lamp that matches the job. That makes it useful when beam angle, kelvin, or lamp replacement strategy may vary from one project to another.
Compared with similar products
Compared with integrated LED spot lights, this fixture gives more flexibility because the lamp is selected separately. Compared with smaller MR8 fixtures, the MR16 format is commonly chosen when broader lamp availability or higher output options are needed. As a rule of thumb in landscape lighting, smaller wattage fixtures are commonly used for smaller trees and tighter accents, while larger lamp packages are selected for taller features. Actual performance depends on lamp choice, aiming, distance, and site conditions.
Specifications
- Brand: Kichler
- Manufacturer part number: 15475CBR
- Product type: Landscape accent light / spot light
- System voltage: 12V low voltage
- Operating voltage: 9-15V
- Lamp type: MR16
- Socket type: Bi-Pin (BIPI)
- Socket quantity: 1
- Finish: Centennial Brass
- Rating: Wet rated
- Fixture size: 2.25 in W x 2.25 in H x 5.25 in L (57 x 57 x 133 mm)
- Application: Trees, statuary, textured surfaces, landscape accents
- Lamp included: Not confirmed; lamp sold separately unless otherwise specified by listing
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
