Landscape wide flood light · 12V · hooded adjustable bronze fixture · Kichler 15396AZT
What this product is for
This Kichler 15396AZT is a low-voltage landscape wide flood light for outdoor accent and wash lighting. It is designed for 12V systems and is commonly used to spread light across walls, planting beds, young shrubs, and other wider landscape features.
Use for
Use for wide-angle wall washing, lighting low walls, and highlighting smaller landscape elements where a broader beam is preferred over a tight spotlight. The adjustable hood helps control glare and allows aiming upward as needed.
Avoid for
Avoid using this fixture where a narrow beam, long throw, or integrated LED fixture is required. It is also not the right choice if your project specification requires a sealed LED engine rather than a replaceable lamp system.
Best for
Best for contractors and landscape installers building 12V systems that need a compact flood fixture with replaceable lamp flexibility. It suits projects where future lamp changes, beam selection, or maintenance access matter.
Installed in
Typically installed in garden beds, along low retaining walls, near foundation planting, and in residential or light commercial landscape lighting layouts. For low-voltage runs, a typical rule of thumb is to manage voltage drop to about 10% or less; actual performance depends on cable length, load, transformer sizing, and installation conditions.
Why this product exists
This fixture fills the need between a narrow accent light and a larger flood fixture. The miniature hooded design provides wider coverage in a compact body, while the replaceable T3 Bi-Pin lamp format can simplify service compared with fully integrated fixtures when lamp replacement is preferred.
Compared with similar products
Compared with a micro accent light, this model is intended for broader distribution rather than tight spotlighting or grazing. Compared with integrated LED landscape floods, it offers lamp-service flexibility, but light output, beam performance, and colour temperature depend on the compatible lamp selected.
Specifications
- Manufacturer part number: 15396AZT
- Brand: Kichler
- Product type: Landscape accent / spot and flood light
- Application: Miniature hooded adjustable wide flood light
- System voltage: 12V low voltage, operating range 9V to 15V
- Lamp type: T3
- Socket type: Bi-Pin (BIPI)
- Lamp included: Yes
- Finish: Textured Architectural Bronze
- Fixture size: 5 in W x 5 in H x 4.5 in L (approximately 127 x 127 x 114 mm)
- Use case noted by manufacturer: wide-angle wall washing, young shrubs, and low walls
Actual light output, beam spread, and colour appearance depend on the installed lamp and aiming.
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceT3
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.