- Edmonton Stock: 13
:
from
to
Clear
Clear
Landscape accent light · 12V MR16 max 35W · Centennial brass cast brass housing · Kichler 15384CBR
SKU: 15384CBR
12V low-voltage landscape accent light with cast brass housing in a centennial brass finish. Uses 1 MR16 bi-pin lamp up to 35W, lamp not included, and is commonly used for spotlighting small trees, stonework, and architectural details; actual light output depends on the lamp selected and installation conditions.
What this product is for
This low-voltage landscape accent light is used to direct focused light onto trees, planting beds, stone features, columns, signs, and exterior architectural details. The cast brass housing and wet-location rating make it suitable for outdoor installations in Canadian residential and light commercial landscape lighting systems.
Use for
Use for 12V landscape lighting layouts where you want a compact directional fixture with a replaceable MR16 lamp. It is commonly used for spotlighting, cross-lighting, and grazing. As a rule of thumb, smaller MR16 accent fixtures are typically selected for smaller trees, shrubs, boulders, and façade details rather than broad-area lighting. Actual performance depends on lamp beam spread, wattage, aiming, and site conditions.
Avoid for
Avoid using this fixture where an integrated LED fixture is specifically required, where a lamp is expected to be included in the box, or where wide flood coverage is needed from a single fixture. It is also not the right choice for line-voltage 120V installations without a compatible low-voltage transformer.
Best for
Best for contractors and landscape installers who want a serviceable 12V fixture with replaceable MR16 lamp flexibility. Suitable for projects where lamp choice, beam spread, and colour temperature need to be selected separately to match the application.
Installed in
Typically installed in garden beds, around walkways, at the base of trees, near retaining walls, and around building perimeters. Commonly paired with low-voltage landscape cable and a 12V transformer. For longer runs, voltage drop should typically be kept to 10% or less for consistent lamp performance.
Why this product exists
This fixture provides a compact, directional accent-lighting option in a corrosion-resistant cast brass body, allowing installers to use replaceable MR16 lamps instead of being locked into one integrated light source. That can simplify future lamp changes and beam adjustments over the life of the system.
Compared with similar products
Compared with integrated LED accent lights, this fixture gives more flexibility because the lamp is selected separately. Compared with larger flood fixtures, it is better suited to tighter beam control and smaller focal points. Compared with lower-cost non-brass housings, cast brass is commonly chosen where corrosion resistance and long outdoor service life matter.
Specifications
- Brand: Kichler
- Manufacturer part number: 15384CBR
- Product type: Landscape accent light / spot & flood light
- System voltage: 12V low voltage
- Lamp type: 1 x MR16
- Base / socket: Bi-pin
- Maximum wattage: 35W
- Lamp included: No
- Material: Cast brass
- Finish: Centennial Brass
- Location rating: Wet location
- Dimensions: 6 in L x 2.5 in W x 3.66 in H (152 x 64 x 93 mm)
- Weight: 1.84 lb (0.83 kg) approximately
- Wire length: 35 in (889 mm)
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.