- Edmonton Stock: 20
:
from
to
Clear
Clear
Path Light · 12V · Adjustable Shade Copper Fixture · Kichler 15350CO
SKU: 15350CO
12V low-voltage path light with an adjustable copper shade for tuning light spread along walkways, planting beds, and patio edges. Uses one S8 wedge-base lamp up to 24.4W; commonly selected where contractors want a serviceable fixture rather than an integrated LED unit.
What this product is for
This low-voltage path light is used to illuminate walkways, garden edges, and outdoor living areas with a traditional copper fixture and adjustable top shade. It is built for 9-15V landscape lighting systems and accepts one replaceable S8 wedge-base lamp.
Use for
Use for pathway lighting, planting beds, patio perimeters, and residential landscape projects where adjustable light spread is useful. It suits installations where a replaceable lamp fixture is preferred for easier long-term service.
Avoid for
Avoid for line-voltage 120V circuits, integrated-LED-only specifications, or applications requiring a lamp to be included in the box. Confirm transformer capacity, lamp selection, and voltage drop before ordering.
Best for
Best for contractors and landscape installers specifying a copper path light with a classic appearance, field-adjustable shade position, and serviceable lamp format. Typical guidance: path lights around this height are commonly used to create comfortable walkway illumination without excessive glare, but actual spacing and light coverage depend on lamp choice, mounting layout, and site conditions.
Installed in
Installed in low-voltage landscape systems at homes, townhouse projects, garden paths, courtyards, and light commercial exterior spaces. Commonly paired with 12V landscape transformers and direct-burial low-voltage cable sized for run length and voltage drop.
Why this product exists
This fixture gives installers a traditional copper path light that can be aimed by adjusting the top shade, helping fine-tune spread and appearance on site. The replaceable-lamp design can reduce maintenance cost over time compared with fully integrated fixtures when lamp changes are preferred.
Compared with similar products
Compared with fixed-shade path lights, this model allows more control over light distribution. Compared with integrated LED fixtures, it uses a replaceable S8 wedge-base lamp, which may suit projects that prioritize serviceability and lamp choice. Actual performance depends on lamp wattage, beam pattern, transformer output, cable length, and local electrical code.
Specifications
- Manufacturer part number: 15350CO
- Brand: Kichler
- Product type: Low-voltage path light
- System voltage: 12V nominal, 9-15V operating
- Lamp type: 1 x S8 wedge-base lamp
- Max wattage: 24.4W
- Lamp included: No
- Socket: Wedge base
- Material/finish: Copper
- Height: 21.5 in (546 mm)
- Shade diameter/width: 6 in (152 mm)
- Lead wire length: 21 in (533 mm)
- Glass: Satin etched glass
- Certification: cULus
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
