Path Light · 12V · Side-Mount Directional Spread · Textured Black · Kichler 15315BKT
What this product is for
This 12V low-voltage landscape path light is used to light walkways, garden edges, patios, and planting beds with a more directional spread and less direct glare than many centre-mount path lights. The side-mount head style is commonly chosen where appearance and controlled light distribution both matter.
Use for
Use for residential and light commercial landscape lighting systems, pathway definition, garden accent lighting, and outdoor areas where a low-voltage fixture is preferred. It is suitable for 9-15V landscape lighting systems and uses one S8 wedge-base lamp.
Avoid for
Avoid for line-voltage 120V installations, integrated-LED-only specifications, or projects requiring a confirmed included lamp, because this fixture is lamp-based and lamp selection may vary by supplier. Avoid where a wide flood or tree-uplighting fixture is required.
Best for
Best for contractors and landscape installers who want a replaceable-lamp path light with a textured black finish and a side-mount profile for directional pathway lighting without pronounced glare. It is also a practical choice when future lamp replacement is preferred over replacing an integrated LED fixture.
Installed in
Typically installed in low-voltage landscape lighting layouts around homes, townhouse entries, garden paths, patios, and similar exterior pedestrian areas. As a rule of thumb, path lights around 18 in to 24 in high (approximately 457 to 610 mm) are commonly used to create comfortable pathway illumination, but actual spacing and light coverage depend on lamp choice, mounting layout, and site conditions.
Why this product exists
This fixture exists for projects that need decorative path lighting with more controlled output and a cleaner side-mounted appearance. The replaceable-lamp format can simplify long-term maintenance compared with integrated fixtures. Actual performance depends on lamp selection, transformer output, wire run length, voltage drop, and local electrical code.
Compared with similar products
Compared with centre-mount path lights, this side-mount design is intended to provide more directional lighting with reduced glare. Compared with integrated LED path lights, it offers lamp-serviceability, which can be useful for maintenance planning and future replacement. For low-voltage landscape systems, a typical rule of thumb is to keep voltage drop to 10% or less and size the transformer at approximately 125% of connected load.
Specifications
- Brand: Kichler
- Manufacturer part number: 15315BKT
- Product type: Landscape path light
- Collection / family: Six Groove
- Mounting / design: Side mount
- System voltage: 12V low voltage, operating range 9-15V
- Finish: Textured Black
- Lamp type: S8
- Socket: 1 wedge-base socket
- Fixture size: 19.5 in H x 6 in dia. (approximately 495 mm H x 152 mm dia.)
- Application: Path and spread lighting for outdoor landscape systems
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.