- Edmonton Stock: 20
:
from
to
Clear
Clear
Path Light · 12V · Side-Mount Directional Design · Kichler 15315AZT
SKU: 15315AZT
12V landscape path light with a side-mount design for more directional illumination and reduced glare, finished in textured architectural bronze. Commonly used for walkways, garden edges, and patio perimeters on low-voltage systems with replaceable S8 wedge-base lamps.
What this product is for
This low-voltage path light is used to illuminate walkways, planting beds, patios, and other outdoor pedestrian areas. The side-mount design helps direct light outward while reducing direct glare at eye level.
Use for
Use for 12V landscape lighting systems in residential and light commercial exterior applications, including paths, garden borders, and courtyard edges. It is designed for use with an S8 wedge-base lamp and operates on 9-15V systems.
Avoid for
Avoid using this fixture where an integrated LED fixture is specifically required, or where line-voltage 120V luminaires are needed. It is also not the right choice for large-area flood lighting or tall-tree uplighting.
Best for
Best for contractors and property owners who want a replaceable-lamp path light in a textured architectural bronze finish. It suits installations where serviceability matters and where directional path lighting is preferred over broader 360-degree spread.
Installed in
Typically installed along sidewalks, landscape beds, drive edges, patios, and entry approaches in outdoor low-voltage lighting layouts. Path lights around this general size are commonly used to create comfortable pedestrian guidance lighting; actual spacing and light coverage depend on lamp selection, mounting layout, and site conditions.
Why this product exists
This fixture provides pathway illumination with a more controlled side-mount light pattern to help limit glare and place light where it is needed. For maintainable landscape systems, replaceable lamp fixtures are often preferred because lamp changes can be simpler and lower-cost than replacing an integrated fixture.
Compared with similar products
Compared with standard top-spread path lights, this side-mount style is better suited where more directional output is desired. Compared with integrated LED path lights, it offers lamp replaceability and easier field servicing, but final light output depends on the lamp selected. As a typical low-voltage design rule, wire size and run length should be planned to control voltage drop; actual performance depends on installation conditions, transformer sizing, cable length, and local electrical code.
Specifications
- Product type: Landscape path light
- Mounting/style: Side mount
- System voltage: 12V low voltage, operating range 9-15V
- Lamp type: S8
- Socket: 1 wedge-base socket
- Finish: Textured Architectural Bronze
- Fixture size: 19.5 in H x 6 in dia. (approximately 495 mm H x 152 mm dia.)
- Application: Outdoor pathway and landscape lighting
- Brand: Kichler
- Manufacturer part number: 15315AZT
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceS8
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
