- Edmonton Stock: 11
:
from
to
Clear
Clear
Louvered Brick Light · 12V · Textured Architectural Bronze · Kichler 15073AZT
SKU: 15073AZT
12V louvered brick light for integration into brick walls during construction, commonly used for step, wall, patio and stair illumination with reduced glare. Includes lamping and mounting bracket; for low-voltage landscape systems, actual light output and performance depend on transformer sizing, cable run and installation conditions.
What this product is for
This 12V louvered brick light is designed to be built into brick walls during construction to provide low-level outdoor illumination for steps, stairways, patios and retaining walls. The louvered face helps control glare while casting a low, even spread of light.
Use for
Use for masonry step lighting, wall lighting, patio perimeters, stair transitions and other low-voltage landscape applications where a recessed brick light is preferred. It is commonly selected where electricians or landscape contractors need a fixture that blends into brickwork with a textured architectural bronze finish.
Avoid for
Avoid for retrofit surface-mount applications where the wall is already finished and cannot accommodate a built-in brick fixture. It is also not the right choice where an integrated LED fixture is specifically required by the project specification.
Best for
Best for new masonry construction, landscape lighting upgrades tied into existing 12V systems, and projects where glare control matters near walking surfaces. As a typical low-voltage rule of thumb, keep voltage drop to approximately 10% or less for consistent lamp performance. Actual performance depends on cable length, conductor size, transformer loading and site conditions.
Installed in
Installed in exterior brick walls, landscape walls, stair risers and similar masonry features. Fixture size is approximately 9.5 in W x 4 in H x 4 in L (241 x 102 x 102 mm).
Why this product exists
This product exists to provide a built-in low-voltage step and wall lighting option that is less visually obtrusive than surface fixtures. The louvered design helps direct light downward and outward for safer navigation around outdoor transitions.
Compared with similar products
Compared with open-face or glass-lens brick lights, this louvered version is better suited where reduced direct glare is preferred. Compared with integrated LED hardscape fixtures, this lamped design can suit projects that want a serviceable lamp-based fixture within an existing 12V landscape lighting system.
Specifications
- Manufacturer part number: 15073AZT
- Brand: Kichler
- Product type: Louvered brick light / step light
- System voltage: 12V, operating voltage 9-15V
- Finish: Textured Architectural Bronze
- Lamp type: T3
- Socket type: BIPI
- Sockets: 2 BIPI
- Bulb included: Yes
- Construction application: Designed to be integrated into brick walls during construction
- Mounting: Includes stainless steel mounting bracket
- Fixture dimensions: 9.5 in W x 4 in H x 4 in L (241 x 102 x 102 mm)
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceT3
- MountingRecessed
- Width9.5"
- Height4"
- Depth3.25"
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 25
