- Edmonton Stock: 13
:
from
to
Clear
Clear
Occupancy Sensor Switch · 120V · PIR 150° Coverage, No Neutral Required, White · Intermatic IOS-DPBIMF-WH
SKU: IOS-DPBIMF-WH
In-wall PIR occupancy sensor switch for 120V lighting control with no neutral required, suited to retrofit residential installations. Provides 150° coverage up to 980 sq ft (approximately 91 sq m), adjustable 15-second to 30-minute time delay, and a decorator wall plate.
What this product is for
This in-wall occupancy sensor switch automatically turns lighting on and off based on motion detection using passive infrared (PIR) sensing. It is designed for 120V indoor lighting control where a no-neutral device is preferred for retrofit work.
Use for
Use for small to medium residential rooms such as laundry rooms, closets, garages, hallways, utility spaces, and similar indoor areas where automatic lighting control helps reduce unnecessary run time. It is commonly used where an electrician needs occupancy sensing without pulling a neutral conductor to the switch box.
Avoid for
Avoid using this sensor where the load type exceeds the device rating, where line-of-sight PIR coverage is blocked, or where a neutral-required sensor is needed for broader LED compatibility. It is not intended for outdoor use or for spaces where motion is minimal and occupants may remain still for long periods.
Best for
Best for retrofit residential lighting control with incandescent, fluorescent, CFL, and similar 120V loads within rating. This model is a practical choice when wall box wiring is limited and a decorator-style occupancy sensor with included wall plate is required.
Installed in
Installs in a standard in-wall switch box and fits a standard decorator wall plate opening. Product size is approximately 1-5/8 in D x 1-7/16 in W x 2-3/4 in H (41 x 37 x 70 mm). Maximum mounting height is 4 ft (1.2 m).
Why this product exists
This sensor exists to add automatic lighting control in residential spaces without requiring a neutral connection. That makes it useful for renovation and replacement work where existing switch loops may not include a neutral conductor.
Compared with similar products
Compared with standard wall switches, this occupancy sensor can reduce wasted lighting run time by switching lights off after the selected delay. Compared with neutral-required sensors, this no-neutral model is easier to apply in many retrofit boxes, but electricians should confirm load compatibility before specifying. As typical guidance, occupancy sensors are commonly used in intermittently occupied spaces rather than rooms with long periods of still occupancy. Actual performance depends on room layout, mounting location, load type, and local electrical code.
Specifications
- Manufacturer part number: IOS-DPBIMF-WH
- Brand: Intermatic
- Product type: Residential in-wall push button PIR occupancy sensor switch
- Input voltage: 120 VAC, 50/60 Hz
- Sensor technology: PIR (passive infrared)
- Coverage: 150° field of view, up to 980 sq ft (approximately 91 sq m)
- Neutral required: No
- Adjustable time delay: 15 seconds to 30 minutes
- Adjustable light level: 30 lux to daylight
- Current rating: 15 A
- Tungsten/incandescent rating: 800 W
- Fluorescent/inductive rating: 800 VA
- Resistive rating: 800 W
- Motor rating: 1/4 HP
- Colour: White
- Mounting: In-wall
- Wall plate: Standard decorator wall plate included
- Operating temperature: 32°F to 131°F (0°C to 55°C)
- Certifications: cULus
- Warranty: 2-year limited
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 918
- Edmonton Stock: 218
- Edmonton Stock: 605
- Edmonton Stock: 570
- Edmonton Stock: 651
