115 lm LED step and wall light · 120V 3000K 3.9W · round white finish · WAC Lighting WL-LED310-C-WT
What this product is for
This 120V round integrated LED step and wall light is used to mark steps, stair risers, walls, walkways, and transition points with low-glare illumination. It is suited to residential and light commercial exterior or interior applications where a compact recessed fixture is preferred.
Use for
Use for concrete, masonry, or finished wall step-lighting layouts, deck and stair transitions, retaining walls, corridor walls, and architectural wayfinding. The 3000K warm white output is commonly selected for residential and hospitality-style projects.
Avoid for
Avoid using this fixture as the primary area light for large outdoor spaces or where high-output flood or pathway illumination is required. It is a marker and accent step light, not a substitute for general site lighting.
Best for
Best for electricians and lighting contractors specifying a compact 120V recessed step light with concealed hardware, warm white output, and a white finish that blends into light-coloured walls and stair details.
Installed in
Typically installed in stair risers, landscape walls, entry steps, hall walls, and exterior architectural surfaces. The fixture body is approximately 3-1/2 in high x 3-1/2 in wide x 3 in deep (89 x 89 x 76 mm).
Why this product exists
This product provides code-conscious wayfinding and step visibility without the glare of larger wall packs or surface fixtures. Its integrated LED source, die-cast corrosion-resistant aluminium construction, and flush appearance help reduce maintenance while keeping the installation visually clean.
Compared with similar products
Compared with larger wall lights, this model is intended for close-range step and wall illumination. Compared with low-voltage landscape fixtures, it connects directly to a 120V branch circuit, which can simplify some installations where a transformer is not desired. As a rule of thumb, step lights like this are typically spaced by layout and visual effect rather than by a fixed coverage number. Actual performance depends on installation conditions, mounting height, spacing, surrounding finishes, and local electrical code.
Specifications
- Brand: WAC Lighting
- Manufacturer part number: WL-LED310-C-WT
- Product family: LEDme Step and Wall Light
- Type: Round recessed step and wall light
- Voltage: 120 VAC, 50/60 Hz
- Power: 3.9 W
- Delivered lumens: 115 lm
- Colour temperature: 3000K
- CRI: 90
- Dimming: ELV dimming, 100-10%
- Finish: White on aluminium
- Construction: Die-cast corrosion-resistant aluminium alloy
- Rated life: 50,000 hours
- Dimensions: 3-1/2 in W x 3-1/2 in H x 3 in D (89 x 89 x 76 mm)
- Mounting/application: Step and wall lighting, indoor/outdoor use
- Safety/listing: ETL/cETL reported by distributor sources; verify project-specific listing requirements before ordering
- Volts120V
- Watts3.9W
- FinishWhite
- Light SourceLED
- Lumens115
- LED Color Temperature3000K
- DimmableYes
- Diameter3.5"
- RatingsIP66
- BrandWac Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.