- Edmonton Stock: 3
Teck Connector · 1/2 in NPT Hub for 0.52 to 0.72 in OD Cable · Aluminium Body, IP66 · Techspan TKMC050A075
Aluminium Teck connector for 1/2 in NPT hubs, sized for armoured cable with 0.52 to 0.72 in (13.2 to 18.3 mm) outer diameter. Commonly used with ACWU and Teck cable in commercial and industrial installations where a watertight IP66 connection is required.
Delivered to you by May 15 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This Teck connector is used to terminate ACWU and Teck armoured cable into equipment, enclosures, panels, and junction boxes with a 1/2 in NPT threaded hub. It fits cable outer diameters from 0.52 to 0.72 in (13.2 to 18.3 mm) and is built with an aluminium body for corrosion resistance in indoor or outdoor installations.
Use for
Use for Teck and ACWU cable terminations where you need a mechanical cable hold, armour bonding path, and a watertight entry. Suitable for residential, commercial, and industrial work where the cable size falls within the listed OD range and the enclosure has a 1/2 in NPT entry.
Avoid for
Avoid using this connector where the cable outer diameter is below 0.52 in (13.2 mm) or above 0.72 in (18.3 mm), or where the enclosure entry is not 1/2 in NPT. Do not select by conductor count alone; always confirm the actual cable jacket diameter and armour diameter before ordering.
Best for
Best for electricians and contractors looking for a standard 1/2 in Teck connector with a broad cable range, aluminium construction, and IP66 sealing for indoor or outdoor service.
Installed in
Typically installed in control panels, disconnects, motor connections, junction boxes, distribution equipment, and outdoor enclosures using 1/2 in NPT threaded entries.
Why this product exists
This connector provides a secure, code-aligned method of bringing armoured cable into threaded equipment while helping protect the enclosure opening against dust and water ingress. The wider cable range can reduce the number of connector sizes needed on site.
Compared with similar products
Compared with narrower-range Teck connectors, this model covers 0.52 to 0.72 in OD cable, which can simplify stocking for common branch and feeder cable sizes. As a buying rule of thumb, matching the connector to the cable jacket OD is more reliable than choosing by cable trade name alone. Actual fit depends on cable construction and manufacturer tolerances.
Specifications
- Product type: Teck connector
- Brand: Techspan
- Manufacturer part number: TKMC050A075
- Hub size: 1/2 in NPT
- Cable outer diameter range: 0.52 to 0.72 in (13.2 to 18.3 mm)
- Cable armour diameter range: 0.44 to 0.61 in (11.2 to 15.5 mm)
- Material: Aluminium
- Ingress rating: IP66
- Minimum thread length: 0.78 in (19.8 mm)
- Thru bore: 0.52 in (13.2 mm)
- Across flats: 1.496 in (38 mm)
- Typical cable stripping length: 1.65 in (41.9 mm)
- Assembly torque: 36 N·m (approximately 26.5 lb-ft)
Installation guidance is typical only. Actual performance depends on cable construction, installation conditions, and local electrical code.
- TypeWet Teck Connector
- Trade Size1/2"
- ApplicationWet
- Outer Jacket Range0.52"-0.72"
- Compatible Wire Sizes2C14 Teck, 3C14 Teck, 4C14 Teck, 2C12 Teck, 3C12 Teck, 2C10 Teck
- Equal ToST050-462 (0.525 - 0.650) | ST050-464 (0.6 - 0.760)
- BrandTechspan
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 12
- Edmonton Stock: 16
- Edmonton Stock: 1
- Edmonton Stock: 112
- Edmonton Stock: 50
