FS Conduit Outlet Box · 1-Gang · 1/2 in Hub · PVC F Series · Royal RFS10
What this product is for
This 1-gang FS conduit outlet box is used to terminate or change direction on exposed 1/2 in PVC rigid conduit runs while providing a mounting point for devices and covers. It is a PVC F Series box intended for surface-mounted conduit systems.
Use for
Use for commercial, residential, industrial, and institutional conduit installations where a single-gang PVC outlet box is needed. Commonly used where corrosion resistance, non-metallic construction, and compatibility with PVC rigid conduit are required.
Avoid for
Avoid using this box where a different hub configuration, larger conduit size, or a weatherproof assembly with the correct gasketed cover is required. Do not assume outdoor suitability by the box alone; the complete box-and-cover assembly must match the installation and local code requirements.
Best for
Best for exposed PVC conduit runs with a single 1/2 in trade size entry and one-gang device or cover requirements. It suits electricians looking for a compact non-metallic box for corrosive or damp-prone environments when paired with the proper cover.
Installed in
Typically installed in surface conduit systems on walls in utility areas, service spaces, light industrial areas, and exterior-adjacent applications using PVC rigid conduit. Box dimensions are approximately 4-9/16 in H x 2-13/16 in W x 2 in D (116 x 71 x 51 mm).
Why this product exists
This box provides a non-metallic outlet point in an F Series conduit system, helping contractors maintain PVC continuity through the raceway while mounting devices or covers at branch points and terminations.
Compared with similar products
Compared with FSS versions, this RFS10 is listed by distributors as an FS style box with one 1/2 in cable entry and about 17 cu in capacity. If you need a different entry pattern, deeper box, or weatherproof cover arrangement, select the matching F Series variant and cover. As a rule of thumb, conduit fill should remain within code limits, and actual conductor count depends on conductor size, insulation type, device volume allowance, and local electrical code.
Specifications
- Type: FS conduit outlet box
- Series: F Series
- Gang: 1-gang
- Hub size: 1/2 in trade size
- Material: PVC
- Colour: Gray
- Mounting: Lug mount
- Capacity: approximately 17 cu in
- Dimensions: 4-9/16 in x 2-13/16 in x 2 in (116 x 71 x 51 mm)
- For use with: PVC rigid conduit
- Entry: (1) 1/2 in FS cable entry
- Knockouts: None / without knockouts
- Standards noted by distributor listings: UL 514C, CSA C22.2 No. 18.2/85
Actual suitability depends on the cover used, conductor fill, installation conditions, and local electrical code.
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory12 – Loyalty Rewards
Weatherproof GFCI Cover Plate · 1-Gang · PVC · Royal RWGF15/10
RWGF15/10
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory12 – Loyalty Rewards- Edmonton Stock: 5
Rigid PVC Duct Solvent Cement · 250 mL · EcoVOC Clear Formula · Royal RVOC250
RVOC250
22 – Loyalty Rewards- Edmonton Stock: 52
PVC FD conduit outlet box · 1-gang deep blank · no hub, lug mount · Royal RFD
RFD
11 – Loyalty Rewards- Edmonton Stock: 3
- Edmonton Stock: 20
- Edmonton Stock: 13












