:
from
to
Clear
Clear
Keystone Wall Plate · 2-Port · White Single-Gang Faceplate · Cable Concepts Datacomm WPCD0202WH
SKU: WPCD0202WH
2-port white keystone wall plate for standard single-gang low-voltage installations. Accepts two snap-in keystone inserts for data, telecom, coaxial or A/V terminations and provides a clean finished look at the wall.
What this product is for
This 2-port keystone wall plate is used to finish low-voltage cable terminations at the wall in a standard single-gang opening. It is intended for structured cabling systems where two keystone-style inserts are required in one location.
Use for
Use for Ethernet, telephone, coaxial, speaker, HDMI or other low-voltage connections that use standard keystone inserts. Commonly installed in offices, homes, telecom rooms, boardrooms and retrofit data drops.
Avoid for
Avoid using this plate for line-voltage wiring or where a decorator, duplex or specialty opening is required. Confirm keystone insert depth and box clearance before installation in shallow wall cavities.
Best for
Best for contractors and technicians who need a clean 2-port faceplate in a white finish for structured cabling work. It suits standard single-gang low-voltage brackets and wall boxes where a simple snap-in keystone layout is preferred.
Installed in
Typically installed in standard single-gang wall openings in residential, commercial and institutional low-voltage systems. White finish is commonly used to match white devices and wall plates in finished spaces.
Why this product exists
It provides a neat termination point for two keystone connections at the wall instead of leaving low-voltage cabling exposed. This helps organize data and A/V outlets and makes future moves, adds and changes easier.
Compared with similar products
Compared with 1-port plates, this version supports two terminations in one gang location. Compared with higher-port plates, it is a better fit where only one or two services are needed at the outlet. As typical field guidance, 2-port plates are commonly used for combinations such as data plus voice or dual data drops; actual layout depends on cable type, bend radius and box depth.
Actual fit and performance depend on insert dimensions, cable bend radius, wall box depth and installation conditions.
Specifications
- Product type: Keystone wall plate / faceplate
- Ports: 2 keystone openings
- Gang size: Single-gang
- Colour: White
- Application: Low-voltage data, telecom, coaxial and A/V terminations
- Compatibility: Accepts standard snap-in keystone inserts
- Mounting: Standard single-gang wall box or low-voltage mounting bracket
- Material: Plastic
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 350
- Edmonton Stock: 696
