- Edmonton Stock: 18
65 lm LED vertical step light · 120V · photocell · stainless steel · WAC Lighting WL-LED202-30-SS
What this product is for
This 120V LED vertical scoop step light is used to provide low-glare illumination on stairs, walls, and walkways in residential and light commercial outdoor spaces. The integrated photocell turns the fixture on at dusk and off at dawn for automatic operation.
Use for
Use for step risers, retaining walls, stair towers, corridor walls, and exterior walkways where a compact hardwired fixture is needed. It fits a standard 2 in x 4 in junction box with minimum inside dimensions of 3 in x 2 in x 2 in (approximately 76 x 51 x 51 mm).
Avoid for
Avoid using this fixture where high-output area lighting is required, or where a low-voltage landscape system is already planned. This is a 120V hardwired fixture, not a 12V landscape light.
Best for
Best for projects needing automatic night operation, a flush low-profile appearance, and a corrosion-resistant finish. The stainless steel version is a practical choice where added resistance to corrosive outdoor conditions is preferred.
Installed in
Installed in indoor or outdoor wall surfaces, stair structures, and masonry or framed wall assemblies with an appropriate junction box. Suitable for wet locations with an IP66 rating.
Why this product exists
This fixture provides code-conscious step and path illumination from a direct 120V feed without a separate driver. It is designed to improve visibility and wayfinding while keeping glare low and hardware out of sight.
Compared with similar products
Compared with low-voltage step lights, this model does not require a remote transformer or driver. Compared with larger wall lights, it provides a smaller light output intended for guidance lighting rather than general area lighting. As typical guidance only, step lights in this output range are commonly used for visual wayfinding rather than primary illumination. Actual performance depends on mounting height, spacing, surface reflectance, and site conditions.
Specifications
- Brand: WAC Lighting
- Manufacturer part number: WL-LED202-30-SS
- Product type: LED vertical step and wall light with photocell
- Voltage: 120 VAC, 50/60 Hz
- Power: 2 W
- Delivered lumens: approximately 65 lm
- Colour temperature: 3000K
- CRI: 90
- Finish: Stainless steel
- Construction: Corrosion-resistant aluminium alloy with stainless steel option
- Rated life: 54,000 hours
- Dimming: Yes
- Mounting: Fits standard 2 in x 4 in junction box
- Fixture size: 5 in H x 3 in W x 1.5 in extension (approximately 127 x 76 x 38 mm)
- Backplate: 5 in x 3.13 in (approximately 127 x 79 mm)
- Location rating: Wet location, IP66, UL and cUL listed
- Other features: Integrated daylight photocell, no separate driver required, low-profile flush appearance
- Volts120V
- Watts3.9W
- FinishStainless Steel
- Light SourceLED
- Lumens65
- LED Color Temperature3000K
- MountingRecessed
- Width3"
- Height5"
- RatingsIP66
- BrandWac Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 52
PVC FD conduit outlet box · 1-gang deep blank · no hub, lug mount · Royal RFD
RFD
11 – Loyalty Rewards- Edmonton Stock: 100








