- Edmonton Stock: 18
65 lm LED Step Light · 120V 3000K 90 CRI · Photocell White Finish · WAC Lighting WL-LED102-30-WT
Hardwired 120V LED step and wall light with 65 lumens, 3000K output, 90 CRI, and an integrated photocell for automatic dusk-to-dawn operation. Fits a 2 in x 4 in J-box and is commonly used for steps, retaining walls, and pathway transitions where low-glare marker lighting is needed.
What this product is for
This hardwired LED step light is used to mark steps, wall recesses, walkways, and elevation changes with low-level illumination. The integrated photocell switches the fixture on at dusk and off at dawn, making it suitable for exterior residential and light commercial applications.
Use for
- Outdoor steps and stair risers
- Retaining walls and masonry walls
- Pathway transition points
- Deck skirts and perimeter walls
- Entries where automatic night operation is preferred
Avoid for
- Areas needing broad pathway illumination rather than marker light output
- Installations requiring a replaceable lamp
- Low-voltage landscape systems
- Locations where a switched-on-demand fixture is preferred over photocell control
Best for
Best for electricians and landscape lighting installers specifying a compact 120V step light for code-conscious, low-glare wayfinding. The 65 lm output is intended for orientation and accent lighting rather than area lighting.
Installed in
Fits a 2 in x 4 in J-box with minimum inside dimensions of 3 in x 2 in x 2 in (approximately 76 x 51 x 51 mm). Commonly installed in exterior walls, stair structures, landscape walls, and other wet-location assemblies using a hardwired 120V branch circuit.
Why this product exists
This fixture provides a simple way to add permanent step and wall illumination without a remote driver. The built-in photocell reduces unnecessary runtime, and the low-profile face keeps the installation clean with minimal glare and no visible hardware.
Compared with similar products
Compared with low-voltage step lights, this model connects directly to 120 VAC and does not require a separate transformer. Compared with larger wall lights, its 65 lm output is better suited to marking hazards and edges than lighting a full walking surface. As a typical rule of thumb, step lights like this are spaced and aimed for guidance, not for primary pathway coverage. Actual lighting performance depends on mounting height, surface reflectance, spacing, and local electrical code.
Specifications
- Manufacturer part number: WL-LED102-30-WT
- Brand: WAC Lighting
- Product type: LED step and wall light
- Voltage: 120 VAC, 50/60 Hz
- Power: 2 W
- Light output: 65 lm
- Colour temperature: 3000K
- CRI: 90
- Control: Integrated photocell, dusk-to-dawn operation
- Finish: White on aluminium
- Construction: Corrosion-resistant aluminium alloy
- Mounting: Fits 2 in x 4 in J-box; minimum inside dimensions 3 in x 2 in x 2 in (approximately 76 x 51 x 51 mm)
- Ratings: ETL, cETL, IP66, ADA, wet location listed
- Rated life: 54,000 hours
- Warranty: 5 year
- Application: Exterior step, wall, and pathway marker lighting
- Volts120V
- Watts2W
- FinishWhite
- Light SourceLED
- Lumens65
- LED Color Temperature3000K
- MountingRecessed
- Width5"
- Height3"
- RatingsIP66
- BrandWac Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 52
PVC FD conduit outlet box · 1-gang deep blank · no hub, lug mount · Royal RFD
RFD
11 – Loyalty Rewards- Edmonton Stock: 100
