90 lm MR8 LED Landscape Replacement Bulb · 1.5W 2700K 60° Beam · 8-25V AC/DC Dimmable · Brilliance LED MR8-2700-60
What this product is for
This MR8 LED replacement bulb is for low-voltage landscape lighting fixtures that take an MR8 bi-pin lamp. It provides a warm 2700K light with a 60° beam spread for broader illumination than narrow spot lamps.
Use for
Use for landscape accent lighting, small feature lighting, garden details, and decorative outdoor fixtures where a warm white flood beam is needed. It is suitable for damp locations and enclosed luminaires, and it is designed for 8-25V AC/DC low-voltage systems.
Avoid for
Avoid using this lamp in underwater fixtures or in line-voltage applications. It is also not the right choice where a narrow spotlight beam is required for long throw or tight beam control.
Best for
Best for contractors and maintenance buyers replacing 10W halogen MR8 lamps with a lower-wattage LED option while keeping a warm colour tone. A 60° beam is typically chosen when you want a softer, wider spread on nearby planting, stonework, or architectural details rather than a tight highlight.
Installed in
Installed in standard low-voltage MR8 fixtures with bi-pin lamp holders, commonly found in landscape and outdoor decorative lighting systems. Suitable for damp-location fixtures and enclosed luminaires.
Why this product exists
This lamp exists to replace small halogen MR8 lamps with lower energy use, longer service life, and reduced relamping frequency. It is thermally engineered for enclosed fixtures and includes heat overload protection that reduces lumen output in extreme heat without shifting colour.
Compared with similar products
Compared with narrower 15° or 30° MR8 lamps, this 60° version gives a wider flood pattern for shorter-range coverage. Compared with integrated landscape fixtures, a replaceable MR8 lamp can simplify future maintenance because the lamp can be changed without replacing the full fixture. As typical guidance, wider-beam low-wattage lamps are commonly used for softer accent lighting rather than tall-tree uplighting. Actual performance depends on fixture design, aiming, spacing, voltage drop, and site conditions.
Specifications
- Brand: Brilliance LED
- Manufacturer part number: MR8-2700-60
- Lamp type: MR8 bi-pin LED
- Light output: 90 lm
- Wattage: 1.5 W
- Colour temperature: 2700K warm white
- Beam angle: 60° flood
- Input voltage: 8-25V AC/DC
- Dimming: Yes, with Brilliance dimmer and most magnetic transformers
- CRI: 85
- Halogen replacement: 10W halogen, typical replacement guidance
- Rated life: 50,000 hours
- Ingress protection: IP61
- Location rating: Damp location
- Fixture suitability: Suitable for enclosed luminaires
- Heat protection: Automatic thermal reduction above approximately 125°F (52°C)
- Warranty: 5 years
- BrandBrilliance
- Warranty5 year
- Lamps
- Lumens90
- DimmableDimmable
- Watts1.5W
- Color Temperature2700K
- Volts8-25V
- CRI85
- ShapeMR8
- Beam Angle60°
- Diameter1"
- Overall Length1.25"
- BaseBi-Pin
- Bulb FinishPrismatic Lens
- Rated Life50,000hrs
- Pack Size1
- Case Quantity20
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Available to Order | Typically Arrives in 1 - 4 Weeks From Arizona Factory in USA37 – Loyalty Rewards
- Edmonton Stock: 2
- Edmonton Stock: 3









