:
from
to
Clear
Clear
Low-Voltage Mounting Plate · 1-Gang · Steel New-Work Bracket · nVent CADDY MP1S
SKU: MP1S
1-gang low-voltage mounting plate for new construction, used to support Class 2 communication and data devices without a standard electrical box. Steel bracket mounts to wood or metal studs and is typically used with 1/2 to 5/8 in drywall (approximately 12.7 to 15.9 mm).
Delivered to you by Sep 13 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
The nVent CADDY MP1S is a 1-gang low-voltage mounting plate for new-construction wall rough-in. It is used to mount low-voltage Class 2 devices such as data, telecom, cable, and communication outlets where a standard electrical box is not required.
Use for
Use for low-voltage terminations in wood- or metal-stud walls, especially when you want a clean drywall opening and solid device support. Commonly used for data jacks, coax, speaker, communication, and similar low-voltage wall plates.
Avoid for
Do not use for line-voltage power devices, receptacles, switches, or any application requiring a standard electrical box. This plate is intended for low-voltage Class 2 use only.
Best for
Best for new-work low-voltage rough-in where electricians or structured cabling installers need a fast stud-mounted bracket. It is a practical choice when working with finished wall thicknesses of 1/2 to 5/8 in (approximately 12.7 to 15.9 mm).
Installed in
Typically installed on wood or metal studs in residential, commercial, and light institutional walls before drywall. Front or side stud mounting may be used depending on layout and access.
Why this product exists
This bracket provides a simple mounting point for low-voltage outlets while helping avoid the drywall bulging sometimes associated with plaster rings. It also makes wire fishing and trim-out easier on low-voltage jobs.
Compared with similar products
Compared with a standard electrical box, this style is intended only for low-voltage Class 2 cabling and leaves more open space for cable routing. Compared with plastic low-voltage brackets, the MP1S uses pregalvanized steel construction and is commonly selected where installers prefer a rigid metal bracket for new work.
Specifications
- Manufacturer part number: MP1S
- Brand: nVent CADDY
- Product type: Low-voltage mounting plate
- Gang: 1-gang
- Application: Low-voltage Class 2 communication outlets
- Installation: New construction
- Mounting: Wood or metal stud, front or side mounting
- Wall thickness compatibility: 1/2 to 5/8 in (approximately 12.7 to 15.9 mm)
- Material: Steel
- Finish: Pregalvanized
- Approximate dimensions: 4 x 4.5 in (about 102 x 114 mm)
- Listings: UL, cUL
Typical guidance only: low-voltage brackets like this are commonly used where extra cable space and easier trim-out are preferred over a full box. Actual suitability depends on device type, wall construction, installation conditions, and local electrical code.
- MaterialMetal
- Gang1 Gang
- ColourGalvanized
- Used InWood Frame
- Similar ToErico MP1S | Caddy MP1-S
- BrandWhite Label
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 767
- Edmonton Stock: 1013
- Edmonton Stock: 144
- Edmonton Stock: 71
- Edmonton Stock: 8
- Edmonton Stock: 41
- Edmonton Stock: 29
- 1% off trade
NMD90 Copper Building Cable · 14 AWG 2-Conductor with Ground · 150 m Coil · Various Mfg. NMD2C14150
NMD2C14150
Available to Order | Typically Arrives in 1 - 3 Weeks- Edmonton Stock: 12
- Edmonton Stock: 12
- Edmonton Stock: 2500
- Edmonton Stock: 4
- Edmonton Stock: 147
- Edmonton Stock: 528
- Edmonton Stock: 553
- Edmonton Stock: 729
- Edmonton Stock: 119
- Edmonton Stock: 1108
NMD Plastic Connector · 1/2 in · 2-Way · Grey · Kora SPC50 300PC JAR
SPC50 300PC JAR
Available to Order | Typically Arrives in 1 - 3 Weeks48 – Loyalty Rewards
