- Edmonton Stock: 47
:
from
to
Clear
Clear
Range/Dryer Electrical Box · 4-11/16 in Square x 2-1/8 in Deep · 42 cu in Steel Box with Knockouts · Hubbell 72171K
SKU: 72171K
4-11/16 in square steel range/dryer box with 2-1/8 in depth and approximately 42 cu in capacity for larger conductor fill and receptacle terminations. Commonly used for range and dryer receptacles or junction points where conduit entries and box volume matter.
Delivered to you by Jun 20 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This steel square box is used for range and dryer receptacle installations, as well as wall or ceiling junctions where extra box volume is needed. The 4-11/16 in x 4-11/16 in x 2-1/8 in size (119 x 119 x 54 mm, approximate) provides more working room than smaller square boxes.
Use for
Use for range or dryer outlet boxes, conduit-based branch circuit terminations, and junctions where multiple conductors or larger wire sizes need added box capacity. Suitable where 1/2 in and 3/4 in knockouts are required for common conduit entries.
Avoid for
Avoid where a weatherproof box is required, where a non-metallic box is specified, or where the installation needs a factory-assembled receptacle kit rather than the box only.
Best for
Best for electricians installing heavy-duty receptacle boxes for laundry or kitchen appliance circuits, or for junction applications needing approximately 42 cu in of box fill capacity.
Installed in
Typically installed in residential, multi-unit, and light commercial projects using conduit systems. Common mounting locations include wall cavities and service areas for electric ranges and clothes dryers.
Why this product exists
This box provides the larger cubic capacity and physical depth needed for terminations that can be tight in smaller boxes. For trade use, larger square boxes are commonly chosen when conductor count, wire size, or device depth makes box fill a practical concern.
Compared with similar products
Compared with a standard 4 in square box, a 4-11/16 in square box offers more wiring space and easier conductor management. This can help on range and dryer circuits where larger conductors and device terminations take up more room. Actual box fill acceptance depends on conductor size, device count, fittings, and local electrical code.
Specifications
- Manufacturer part number: 72171K
- Brand: Hubbell
- Product type: Square steel range/dryer electrical box
- Size: 4-11/16 in x 4-11/16 in x 2-1/8 in (approximately 119 x 119 x 54 mm)
- Capacity: 42 cu in
- Material: Metal / steel
- Shape: Square
- Knockout sizes: 1/2 in and 3/4 in
- Application: Range receptacle, dryer receptacle, junction box
- Gang4-11/16"
- ColourGalvanized
- Used InWood Frame
- Capacity42 Cubic Inches
- Similar ToBC72171-K
- BrandWhite Label
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 6
- Edmonton Stock: 1
4 in. Square Electrical Box · 2-1/8 in. Deep, 30.3 cu. in., 1 in. KO · Welded Steel · Vista 52171-1
521711
Available to Order | Typically Arrives in 1 - 3 Weeks22 – Loyalty Rewards- Edmonton Stock: 9
- Edmonton Stock: 150
- Edmonton Stock: 263
- Edmonton Stock: 9
- Edmonton Stock: 162
- Edmonton Stock: 203
- Edmonton Stock: 573
