- Edmonton Stock: 12
:
from
to
Clear
Clear
Ceiling Mount Occupancy Sensor · 120-277V · 360° PIR Line Voltage Control · Ortech MPC-50V
SKU: MPC-50V
Line-voltage ceiling mount occupancy sensor with 360° PIR detection for automatic lighting control in commercial and residential spaces. Supports 120-277V circuits with adjustable time delay and ambient light settings; typically used in offices, classrooms, washrooms, and open areas where broad ceiling coverage is needed.
Delivered to you by Jun 20 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This ceiling mount occupancy sensor automatically switches lighting on when motion is detected and off after the selected time delay. It is a line-voltage PIR sensor designed for ceiling installation on 120-277V AC lighting circuits.
Use for
Use for offices, classrooms, corridors, washrooms, storage rooms, and open commercial areas where 360° ceiling coverage is preferred. It is suitable for LED, fluorescent, and other compatible lighting loads within the device rating.
Avoid for
Avoid using where line of sight is blocked, in spaces requiring low-voltage control devices, or where dimming control is required unless the connected system is specifically compatible. Do not exceed the published load ratings.
Best for
Best for electricians and contractors needing a straightforward line-voltage ceiling sensor for broad-area occupancy detection, adjustable shutoff timing, and basic daylight response.
Installed in
Typically installed in finished ceilings over open areas. A 1200 sq ft coverage area is approximately 111 sq m, which is commonly suitable for small open rooms and shared commercial spaces depending on ceiling height, layout, partitions, and sensor placement. Actual detection performance depends on installation conditions and site layout.
Why this product exists
This sensor helps reduce unnecessary lighting runtime by turning lights off when a space is unoccupied. Adjustable time delay and ambient light settings help tailor operation to the room and application.
Compared with similar products
Compared with wall-switch occupancy sensors, a ceiling PIR sensor can provide wider 360° coverage in open spaces. Compared with dimming sensors, this model is intended for standard line-voltage switching rather than advanced dimming control.
Specifications
- Type: Ceiling mount occupancy sensor
- Sensing technology: Passive infrared (PIR)
- Mounting: Ceiling mount
- Voltage: 120-277V AC, 50/60 Hz
- Field of view: 360°
- Coverage: Up to 1200 sq ft (approximately 111 sq m)
- Load rating: 10A resistive
- Incandescent rating: 800W at 120V AC
- Ballast/LED rating: 800VA at 120V AC; 1600VA at 277V AC
- Motor rating: 1/4 HP at 120V AC
- Controls: Adjustable time delay and ambient light level
- Lens: Fresnel lens
- Compatibility: LED, fluorescent, CFL, incandescent lighting
- Optional function: Vacancy override with compatible momentary switch
- Certifications: UL Listed; California Title 24 compliant
- Finish: White
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 804
- Stocking Transition · Limited Availability
- Edmonton Stock: 2
260 lm Double Remote LED Head · 2 x 2 W · 3.6-24 VDC · Votatec BY-Z1102U
BY-Z1102U
16 – Loyalty Rewards- Edmonton Stock: 263
- Edmonton Stock: 49
- Edmonton Stock: 12
700 lm Double Remote Emergency Head · 2 x 5W · 5-24VDC · Votatec BY-Z1302U
BY-Z1302U
24 – Loyalty Rewards
