- Edmonton Stock: 15
:
from
to
Clear
Clear
Mounting Plate · 6 in Round · Pre-Mount for Slim Downlights · NaturaLED PLT-NC/6DL
SKU: PLT-NC/6DL
6 in round pre-mounting plate for NaturaLED slim downlights and commercial recessed downlights. Used in new-construction or open-ceiling rough-in to position the fixture opening before drywall for a cleaner, more consistent installation.
What this product is for
This accessory is a 6 in round pre-mounting plate for compatible NaturaLED slim downlights and recessed downlights. It helps set the fixture location during rough-in so the finished opening is aligned and ready for the light installation.
Use for
Use for 6 in slim LED downlight installations in new construction, renovations with open framing, and commercial or residential ceiling rough-in where a pre-set mounting point is preferred. It is commonly used to improve layout consistency before drywall is installed.
Avoid for
Avoid using this plate as a universal fit accessory where fixture compatibility has not been confirmed. It is not a light fixture, driver, or junction box replacement, and it should not be selected for finished-ceiling retrofit work unless the fixture manufacturer specifically allows it.
Best for
Best for electricians and contractors installing compatible 6 in recessed or slim wafer-style luminaires who want a cleaner rough-in process and more predictable cutout placement. It is especially useful when multiple downlights need consistent spacing across a ceiling.
Installed in
Typically installed between framing members in ceilings before board installation. Suitable for residential suites, corridors, offices, tenant improvements, and other indoor downlighting layouts where 6 in luminaires are being roughed in.
Why this product exists
Pre-mounting plates reduce guesswork during rough-in and help keep fixture openings centred and repeatable. As a typical trade benefit, they can simplify layout and help reduce rework when coordinating lighting positions with joists and ceiling finishes.
Typical guidance only: actual installation results depend on framing layout, ceiling system, fixture model, and local electrical code.
Compared with similar products
Compared with universal plates, this NaturaLED accessory is intended for matching 6 in NaturaLED downlight applications. Compared with retrofit-only installs, a pre-mount plate is generally better suited to open-ceiling rough-in where fixture position needs to be established before drywall.
Specifications
- Product type: Pre-mounting plate / mounting plate accessory
- Fixture size compatibility: 6 in round (approximately 152 mm)
- Application: Slim downlights and commercial recessed downlights
- Installation stage: New construction / rough-in
- Brand: NaturaLED
- Manufacturer part number: PLT-NC/6DL
- Associated order code: P10309
- Indoor lighting accessory category
- Alternate ToLiteline P6020
- BrandNaturaLED
- Warranty5 year
- Lighting Accessories
- Accessory TypeMounting Plate
- Nominal Size6"
- Hole Size6.25"
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 109
- Edmonton Stock: 118
