500 lm Wide Flood Light · 3000K · 60° Beam · Textured Architectural Bronze · Kichler 16158AZT30
What this product is for
This 12V low-voltage landscape flood light is used for wider accent lighting outdoors where a narrow spot is not required. It is suited to illuminating planting areas, shrubs, small trees, signage, stonework, and architectural surfaces with a broader 60° beam.
Use for
Use for landscape lighting systems that require a 12V fixture with integrated LED output, 3000K warm white light, and a textured architectural bronze finish. Common applications include garden beds, façade grazing, wider feature lighting, and general accent coverage where approximately broader spread is more useful than concentrated punch.
Avoid for
Avoid using this fixture where a tight beam is needed for long throw, precise uplighting, or very narrow highlighting of columns and tall features. It is also not the right choice where a replaceable lamp fixture is specifically required.
Best for
Best for contractors and installers building 12V landscape systems that need a sealed integrated LED flood with moderate output and wider beam distribution. A 60° beam is typically selected when you want softer edge definition and more area coverage than a spot or narrow flood.
Installed in
Installed in residential and light commercial outdoor landscapes, including garden beds, lawn edges, entry features, retaining walls, and perimeter planting zones. The fixture is commonly mounted with a ground stake in soil or mulch as part of a low-voltage landscape lighting layout.
Why this product exists
This model fills the need between narrow accent lights and broader wash fixtures by providing 500 lumens with a 60° beam spread in a compact 12V form factor. The integrated, fully sealed LED design reduces lamp replacement work compared with replaceable-lamp fixtures, while built-in surge protection supports outdoor system reliability.
Compared with similar products
Compared with narrower beam landscape accents, this wide flood covers more area at shorter distances with less hotspotting. Compared with larger flood fixtures, it is better suited to smaller-scale landscape features and controlled low-voltage layouts. As a rule of thumb, wider beam fixtures are commonly used when uniform coverage matters more than maximum throw. Actual lighting results depend on mounting height, aiming angle, surface reflectance, spacing, and voltage drop.
Specifications
- Brand: Kichler
- Manufacturer part number: 16158AZT30
- Product type: Landscape LED flood / accent light
- System voltage: 12V low voltage
- Light output: 500 lm
- Colour temperature: 3000K
- Beam spread: 60° wide flood
- Finish: Textured Architectural Bronze
- Construction: Aluminium
- LED type: Integrated, fully sealed LED
- Surge protection: 4,000V
- Power: 7W
- Dimensions: 4.5 in H x 3.5 in L x 3.25 in W (approximately 114 x 89 x 83 mm)
- Volts12
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.