500 lm Wide Flood Light · 2700K · 60° Beam · Textured Architectural Bronze · Kichler 16158AZT27
What this product is for
This integrated LED landscape flood light is used on 12V low-voltage outdoor lighting systems where a wider beam is needed than a narrow spot. It provides 500 lumens at 2700K with a 60° beam spread for warm accent and wash lighting.
Use for
Use for lighting planting beds, shrubs, small trees, stonework, signs, and wider architectural surfaces. The wide flood beam is typically chosen when electricians or landscape contractors want broader coverage with fewer hot spots than a narrow beam fixture.
Avoid for
Avoid using this fixture where a tight spotlight effect, long throw, or lamp-replaceable design is required. It is also not the right choice if the project specification calls for a replaceable MR16-style lamp rather than an integrated LED fixture.
Best for
Best for low-voltage residential and light commercial landscape lighting installations that need a sealed integrated LED flood fixture with warm white output, textured architectural bronze finish, and surge protection. As a rule of thumb, wider beam fixtures like this are commonly used for shorter setbacks and broader wash effects rather than precise highlighting. Actual performance depends on aiming, mounting height, surface reflectance, and local installation conditions.
Installed in
Installed in 12V AC/DC landscape lighting systems operating from 9-15V. Common installation locations include gardens, walkways, landscape beds, retaining walls, and building perimeters in wet-rated outdoor environments.
Why this product exists
This model gives contractors a compact flood option for warm landscape lighting where even centre-to-edge distribution is preferred. The integrated, fully sealed LED design reduces lamp maintenance, and the built-in 4,000V surge protection helps on exposed outdoor low-voltage systems.
Compared with similar products
Compared with narrower spot fixtures, this 60° flood covers a wider area with softer emphasis. Compared with replaceable-lamp fixtures, it offers a sealed integrated LED platform with fewer serviceable parts, but the light source is not field-replaceable. For low-voltage landscape layouts, typical guidance is to manage voltage drop to 10% or less and size cable accordingly; actual results depend on run length, total load, and transformer selection.
Specifications
- Brand: Kichler
- Manufacturer part number: 16158AZT27
- Product type: Landscape LED accent / wide flood light
- System voltage: 12V low voltage
- Operating voltage: 9-15V
- Light output: 500 lumens
- Colour temperature: 2700K
- Beam angle: 60°
- Light source: Integrated LED
- Finish: Textured Architectural Bronze (AZT)
- Construction: Aluminium housing
- Fixture dimensions: 3.5 in L x 3.25 in W x 4.5 in H (89 x 83 x 114 mm)
- Rating: Wet rated
- Protection: 4,000V surge protection
- Design: Fully sealed LED fixture with custom optics for even distribution
- Volts12
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.