- Edmonton Stock: 16
:
from
to
Clear
Clear
500 lm LED landscape flood light · 2700K · 35° beam · Centennial Brass · Kichler 16157CBR27
SKU: 16157CBR27
12V integrated LED landscape flood light with 500 lumens, 2700K warm white output, and a 35° flood beam in a Centennial Brass cast brass housing. Commonly used for accent lighting on planting beds, small trees, columns, and façade details; actual light effect depends on mounting height, aiming, and site conditions.
What this product is for
This 12V landscape flood light is used for outdoor accent and feature lighting where a warm 2700K beam and moderate 35° spread are needed. It suits residential and light commercial landscape installations that call for a brass fixture with integrated LED output.
Use for
Use for uplighting small trees, shrubs, stonework, signage, entry features, columns, and architectural details. A 35° beam is typically chosen when you want more spread than a narrow spot without going to a wide flood.
Avoid for
Avoid using this fixture where a replaceable lamp is required for future field servicing, or where a wider wash pattern is needed across broad walls or large canopies. It is also not the right choice for line-voltage 120V installations without a suitable low-voltage landscape lighting system.
Best for
Best for contractors and landscape installers specifying a warm white 12V accent fixture with a cast brass body, integrated sealed LED engine, and surge protection. It is a practical fit where finish longevity and a traditional brass appearance matter.
Installed in
Installed in low-voltage outdoor landscape systems around homes, multi-residential properties, hospitality sites, and light commercial exteriors. Common mounting locations include garden beds, around walkways, near retaining walls, and at building perimeters.
Why this product exists
This fixture provides a ready-to-install integrated LED flood option for landscape accent lighting in a brass housing. Compared with older lamped fixtures, it reduces relamping labour while delivering a fixed 500 lm output and warm 2700K colour temperature.
Compared with similar products
Compared with a narrow spot, this 35° flood gives a broader beam for softer highlighting and more coverage on medium features. Compared with a wide flood, it offers more control and less spill. As a rule of thumb in landscape lighting, smaller wattage accent fixtures are commonly used for smaller trees and detail lighting rather than large-area illumination. Actual performance depends on aiming, distance, ambient light, and installation conditions.
Specifications
- Manufacturer part number: 16157CBR27
- Brand: Kichler
- Product type: Integrated LED landscape flood / accent light
- System voltage: 12V low voltage
- Light output: 500 lumens
- Colour temperature: 2700K warm white
- Beam spread: 35° flood
- Finish: Centennial Brass
- Material: Cast brass
- Construction: Integrated, fully sealed LED fixture
- Surge protection: 4,000V
- Application: Outdoor landscape accent lighting
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.