500 lm LED landscape flood light · 3000K · 35° beam · textured black · Kichler 16157BKT30
What this product is for
This 12V low-voltage landscape flood light is used for outdoor accent lighting where a controlled 35° beam and warm 3000K colour temperature are needed. It suits highlighting planting beds, small to medium trees, stonework, signs, and architectural details.
Use for
Use for landscape lighting systems operating from 9-15V, especially where electricians or contractors want an integrated LED fixture with a sealed housing, textured black finish, and consistent beam control. The 500 lm output is commonly used for focused accent lighting rather than broad area lighting.
Avoid for
Avoid for applications where a replaceable lamp is required for future field servicing, or where a wider beam spread is needed to wash large walls or broad planting areas. For larger coverage, a wider flood or higher-output fixture may be a better fit.
Best for
Best for low-voltage landscape projects that need a neat fixture appearance, warm white output, and a narrower flood beam with clean centre-to-edge light distribution. Typical guidance: a 35° flood is commonly chosen for accenting features with more focus than a wide flood. Actual lighting effect depends on mounting distance, aiming angle, surface reflectance, and site conditions.
Installed in
Installed in residential and light commercial landscape lighting systems, including gardens, walkways, entry features, retaining walls, and building perimeters. Suitable for wet locations and outdoor Canadian installations when matched to the correct low-voltage transformer and wiring method.
Why this product exists
This fixture provides a compact integrated LED flood option for contractors who want controlled beam spread, warm white presentation, and reduced maintenance compared with lamp-based fixtures. The sealed LED design and 4,000V surge protection help support long-term outdoor use on 12V systems.
Compared with similar products
Compared with wider flood fixtures, this 35° beam gives more focused accent lighting. Compared with adjustable-lumen models, this fixture provides a fixed 500 lm output. Compared with replaceable-lamp landscape fixtures, integrated LED designs typically reduce relamping, but the light source is not field-replaceable in the same way. For low-voltage runs, a typical rule of thumb is to target no more than about 10% voltage drop; wire size and run length should be selected accordingly. Actual performance depends on installation conditions, insulation, layout, and local electrical code.
Specifications
- Brand: Kichler
- Manufacturer part number: 16157BKT30
- Product type: Landscape LED flood / accent light
- System voltage: 12V low voltage
- Operating voltage: 9-15V
- Light output: 500 lumens
- Colour temperature: 3000K
- Beam angle: 35°
- Light source: Integrated LED
- Location rating: Wet rated
- Finish: Textured Black
- Surge protection: 4,000V
- Fixture size: 3.25 in W x 4.5 in H x 3.5 in L (approximately 83 x 114 x 89 mm)
- Application: Outdoor landscape accent lighting
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.