500 lm LED landscape accent spot light · 2700K · 10° beam · textured black · Kichler 16156BKT27
What this product is for
This 12V landscape LED accent spot light is used for narrow-beam outdoor highlighting where a controlled punch of warm white light is needed. It suits residential and light commercial landscape lighting systems for feature trees, entry details, masonry, signage accents, and architectural focal points.
Use for
Use for precise uplighting and accent lighting on smaller landscape features, columns, textured walls, address features, and façade details. The 10° beam is commonly selected when electricians or landscape contractors want a tight, concentrated beam rather than broad wash coverage.
Avoid for
Avoid using this fixture where wide flood coverage is required across large planting beds, broad walls, or general area lighting. It is also not the right choice when a replaceable-lamp fixture is specifically required, since this model is an integrated LED fixture.
Best for
Best for installations that need a narrow 10° beam, warm 2700K colour temperature, and a textured black fixture that blends into darker landscape settings. It is a practical choice where controlled aiming and reduced spill light matter more than wide coverage.
Installed in
Installed in 12V landscape lighting systems with ground-mounted placement. The fixture body is approximately 3.5 in L x 3.25 in W x 4.5 in H (89 x 83 x 114 mm) and includes a 48 in (1.2 m) lead wire for connection into low-voltage landscape runs.
Why this product exists
This model gives contractors a compact integrated LED accent fixture for tight-beam highlighting without changing lamps. Kichler specifies custom optics for cleaner centre-to-edge light distribution and 4,000V surge protection for added resilience in outdoor low-voltage systems.
Compared with similar products
Compared with wider 35° or 60° landscape accents, this 10° version is better for tighter focal points and longer throw effects on narrow targets. At 500 lm and 7W, it is typically chosen when more punch is needed than lower-output accent fixtures. As a rule of thumb, narrow-beam fixtures are commonly used to isolate specific features rather than light an entire area. Actual performance depends on aiming, distance, ambient light, and installation conditions.
Specifications
- Brand: Kichler
- Manufacturer part number: 16156BKT27
- Product type: Landscape LED accent spot light
- System voltage: 12V
- Light output: 500 lm
- Wattage: 7W
- Colour temperature: 2700K
- Beam angle: 10° narrow spot
- Finish: Textured black
- Housing material: Aluminium
- Mounting: Ground mount
- LED type: Integrated LED
- Lead wire: 48 in (1.2 m)
- Wire size: 18 AWG
- Dimensions: 3.5 in L x 3.25 in W x 4.5 in H (89 x 83 x 114 mm)
- Surge protection: 4,000V
- Operating range: 9V-15V AC/DC typical for Kichler integrated LED landscape fixtures
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.