500 lm LED landscape spot light · 2700K 10° beam 12V · Textured architectural bronze · Kichler 16156AZT27
What this product is for
This 12V integrated LED landscape spot light is used for narrow-beam accent lighting in outdoor installations. It delivers 500 lumens of 2700K warm white light through a 10° spot beam, making it suitable for highlighting architectural details, feature planting, columns, signs, and similar focal points.
Use for
Use for focused uplighting and accent lighting where a tight beam spread is required. Typical applications include smaller trees, entry features, stone walls, address markers, and façade details where spill light needs to be limited. As a rule of thumb, narrow-beam fixtures like this are commonly chosen when the goal is punch and definition rather than broad area coverage.
Avoid for
Avoid using this fixture where wide, even coverage is needed across planting beds, large walls, or broad landscape areas. It is also not the right choice when a replaceable lamp platform is required, since this model is an integrated LED fixture.
Best for
Best for contractors and landscape installers specifying a compact 12V accent fixture with warm white output, a narrow 10° beam, textured architectural bronze finish, and integrated surge protection for outdoor low-voltage systems.
Installed in
Installed in low-voltage landscape lighting systems in residential and light commercial exterior projects, including gardens, walk-up approaches, monument features, and building perimeters. Typical low-voltage design guidance is to manage voltage drop to approximately 10% or less; wire size and run length should be selected accordingly. Actual performance depends on installation conditions, transformer sizing, cable layout, and local electrical code.
Why this product exists
This fixture exists to provide a tighter and more controlled beam than flood-style landscape lights, helping installers place light exactly where it is needed. The integrated LED design reduces lamp replacement maintenance compared with lamped fixtures, while the textured architectural bronze finish suits many outdoor installations.
Compared with similar products
Compared with wider flood versions in the same family, this 10° spot produces a more concentrated beam for stronger emphasis on a smaller target area. Compared with replaceable-lamp landscape fixtures, it offers lower maintenance but does not provide lamp-swap flexibility. Compared with broader beam accent lights, it is the better choice when tighter aiming and reduced spill light matter.
Specifications
- Brand: Kichler
- Manufacturer part number: 16156AZT27
- Product type: Landscape LED spot light / accent light
- System voltage: 12V
- Light source: Integrated LED
- Delivered light output: 500 lm
- Colour temperature: 2700K warm white
- Beam spread: 10° spot
- Input power: 7W
- Apparent power: 10VA
- Efficacy: approximately 71 lm/W
- Finish: Textured architectural bronze (AZT)
- Surge protection: 4,000V
- Application: Outdoor landscape accent lighting
- Volts12
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.