200 lm LED landscape spot light · 3000K · 10° beam · Centennial Brass · Kichler 16150CBR30
What this product is for
This low-voltage 12V landscape spot light is used for tight-beam accent lighting where a narrow 10° distribution is needed. It is suited to highlighting architectural details, small trees, signage, stone features and other focal points with a controlled 3000K white light output.
Use for
Use for focused uplighting and directional accent lighting in residential and light commercial landscape systems. A 10° beam is typically chosen when you want a tighter punch of light on a specific feature rather than broad area coverage.
Avoid for
Avoid using this fixture where a wide wash or flood effect is required across larger planting beds, walls or open areas. For broader coverage, a flood beam fixture is usually the better choice.
Best for
Best for contractors and installers specifying a compact brass landscape accent with integrated LED output, narrow beam control and 3000K colour temperature. It is a practical choice where fixture finish, beam precision and low-voltage compatibility matter.
Installed in
Installed in 12V outdoor landscape lighting systems around homes, gardens, walkways, entry features, retaining walls and light commercial exterior spaces. Commonly paired with low-voltage cable, burial-rated connectors and a properly sized landscape transformer.
Why this product exists
This fixture is designed to provide a compact, integrated LED accent option with a narrow beam and brass housing for landscape applications where replaceable lamps are not being used. The sealed LED design reduces lamp changes, while the brass body supports long-term outdoor use.
Compared with similar products
Compared with wider flood landscape fixtures, this 10° model delivers a tighter, more concentrated beam for feature lighting. Compared with larger-output accent lights, 200 lumens is commonly used for smaller focal points and controlled highlighting rather than large-scale illumination. As a rule of thumb, actual lighting effect depends on aiming, mounting distance, surface reflectance and surrounding ambient light.
Specifications
- Brand: Kichler
- Manufacturer part number: 16150CBR30
- Product type: Integrated LED landscape accent / spot light
- System voltage: 12V low voltage
- Light output: 200 lumens
- Colour temperature: 3000K
- Beam spread: 10° spot
- Finish: Centennial Brass
- Material: Cast brass
- Power: approximately 2.5W
- CRI: 80
- Surge protection: 4,000V
- Fixture dimensions: 3.25 in W x 4.5 in H x 3.5 in L (approximately 83 x 114 x 89 mm)
- Application: Wet location / outdoor landscape lighting
Typical guidance only: narrower beam fixtures like this are commonly used for tighter accenting of smaller features. Actual performance depends on aiming, spacing, transformer loading, cable run length, voltage drop and local installation conditions.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.