200 lm LED landscape spot light · 2700K 10° beam 12V · textured black · Kichler 16150BKT27
What this product is for
This low-voltage landscape spot light is used for focused outdoor accent lighting where a narrow beam is needed. It delivers 200 lumens of 2700K warm white light through a 10° beam spread for controlled highlighting of landscape and architectural features.
Use for
Use for uplighting smaller trees, specimen shrubs, address stone, columns, garden features, and façade details. A 10° beam is commonly selected when electricians or landscape contractors need a tighter, more concentrated punch of light rather than broad area coverage.
Avoid for
Avoid using this fixture where wide flood coverage is required, such as broad wall washing, large planting beds, or general pathway illumination. For those applications, a wider beam spread or a different fixture style is typically the better choice.
Best for
Best for low-voltage outdoor systems that need a compact integrated LED accent fixture in a textured black finish. It suits residential and light commercial landscape lighting layouts where warm colour temperature and precise aiming matter.
Installed in
Typically installed in garden beds, mulch areas, softscape edges, and around hardscape features on 12V landscape lighting systems. The fixture is suitable for wet locations and is commonly aimed upward or across a feature from short to moderate distances.
Why this product exists
This model exists for applications where a replaceable-lamp fixture is not required and a sealed integrated LED accent light is preferred for a clean appearance and reduced maintenance. The narrow beam helps contractors place light exactly where needed without excessive spill.
Compared with similar products
Compared with wider-beam landscape spots, this 10° version provides a tighter centre beam for more dramatic highlighting. Compared with higher-lumen accent fixtures, the 200-lumen output is typically better suited to smaller features and shorter throw distances. As a rule of thumb, narrower beam fixtures are commonly used when the goal is emphasis rather than broad coverage. Actual performance depends on aiming, mounting height, surface reflectance, and local installation conditions.
Specifications
- Brand: Kichler
- Manufacturer part number: 16150BKT27
- Product type: Integrated LED landscape accent / spot light
- System voltage: 12V
- Light output: 200 lumens
- Colour temperature: 2700K warm white
- Beam angle: 10°
- Finish: Textured black
- Material: Aluminium
- Construction: Fully sealed integrated LED fixture
- Surge protection: 4,000V
- Efficacy: approximately 80 lm/W
- Power: 2.5W
- CRI: 80
- Dimensions: 4.5 in H x 3.5 in L x 3.25 in W (114 mm x 89 mm x 83 mm)
- Location rating: Wet location
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.