200 lm LED landscape spot light · 2700K · 10° beam · Textured architectural bronze · Kichler 16150AZT27
What this product is for
This 12V integrated LED landscape spot light is used for tight-beam accent lighting outdoors. It is suited to highlighting architectural details, specimen plantings, signs, columns, and other focal points where a narrow 10° beam is preferred over a wider flood pattern.
Use for
Use for low-voltage landscape lighting systems where warm 2700K light and controlled beam spread are important. Typical applications include uplighting smaller trees, grazing textured walls, and drawing attention to entry features or garden elements. As a rule of thumb, narrower beam fixtures like this are commonly chosen when you want more punch on a smaller target rather than broad area coverage.
Avoid for
Avoid using this fixture where wide area wash lighting is needed, such as broad shrubs, large façades, or general pathway coverage. It is also not the best choice when a replaceable lamp system is required for future field servicing, since this model uses an integrated LED light source.
Best for
Best for contractors and landscape installers who need a compact accent fixture with a narrow beam, warm colour temperature, and bronze finish that blends into planting beds and exterior materials. The integrated, fully sealed construction and built-in 4 kV surge protection are useful in exposed outdoor installations.
Installed in
Installed in residential and light commercial low-voltage landscape systems, typically in garden beds, around hardscape features, near monument signs, and along building perimeters. The fixture includes an 8 in (203 mm) slotted in-ground stake and wire connectors for standard landscape installation.
Why this product exists
This model exists for applications that need tighter optical control than a flood light. Kichler positions the 16150 series as a 10° spot option within its integrated LED accent range, giving installers a focused beam, warm white output, and a compact cast aluminium housing in textured architectural bronze.
Compared with similar products
Compared with wider 35° or 60° landscape fixtures, this 10° version concentrates the available 200 lumens onto a smaller area for stronger visual emphasis. Compared with lamp-ready fixtures, it reduces relamping but uses an integrated LED module. Typical low-voltage design guidance is to watch voltage drop on longer runs and size the transformer at approximately total fixture wattage multiplied by 1.25. Actual performance depends on cable length, connections, layout, and local electrical code.
Specifications
- Type: Integrated LED landscape accent / spot light
- Brand: Kichler
- Manufacturer part number: 16150AZT27
- Input voltage: 12V
- Voltage range: 9V-15V AC/DC
- Light output: 200 lumens
- Colour temperature: 2700K warm white
- Beam spread: 10° spot
- Wattage: 2.5W
- VA: 3.5VA
- Efficacy: 80 lm/W
- CRI: 80+
- Finish: Textured Architectural Bronze
- Housing material: Cast aluminium
- Construction: Integrated, fully sealed LED fixture
- Surge protection: 4 kV (4,000 V)
- Dimensions: 3.5 in L x 3.25 in W x 4.5 in H (89 x 83 x 114 mm)
- Lead wire: 48 in usable #18-2 SPT-1W leads
- Included accessories: 8 in (203 mm) slotted in-ground stake and 2 gel-filled wire nuts
- Rated life: L70 40,000 hours
- Volts12
- Watts2.5W
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- Lumens200
- LED Color Temperature2700K
- CRI80
- Rated Life40000
- Beam Angle10°
- Width3.25"
- Length3.5"
- Height4.5"
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.