294 lm LED path light · 12V · 2700K flare design, textured architectural bronze · Kichler 16125AZT27
What this product is for
This 12V low-voltage path light is used to illuminate walkways, garden edges, planting beds, and outdoor landscape features with warm 2700K light. The flared shade design helps direct light downward for pedestrian guidance and soft ambient lighting.
Use for
- Walkways and garden paths
- Landscape beds and perimeter lighting
- Residential and light commercial low-voltage outdoor lighting systems
- Projects requiring a warm white 2700K appearance
Avoid for
- Line-voltage 120V installations without a compatible low-voltage transformer
- Applications where a replaceable lamp is required for future lamp-only servicing
- Areas needing high-output flood or accent lighting rather than path illumination
Best for
Best for contractors and landscape installers specifying an integrated LED path light with a decorative flare profile, warm colour temperature, and textured architectural bronze finish for coordinated outdoor lighting layouts.
Installed in
Typically installed in soil or landscaped areas along paths, sidewalks, gardens, and entry approaches as part of a 12V outdoor lighting system. At 21 in (533 mm) high and 8 in (203 mm) diameter, it suits standard path-light spacing in residential landscape designs.
Why this product exists
This fixture provides low-voltage pathway illumination with integrated LED efficiency and a finished architectural look. It is intended for projects where warm light, wet-location suitability, and a coordinated bronze landscape fixture are required.
Compared with similar products
Compared with smaller low-output path lights, this model provides 294 delivered lumens, making it suitable where stronger path illumination is preferred. As a rule of thumb, path lights around 18 to 24 in (457 to 610 mm) high are commonly used to create a broad pool of light along walkways, but actual spacing and light levels depend on layout, mounting position, and surrounding surfaces.
Because this is an integrated LED fixture, there is no separate lamp to replace. That can reduce routine maintenance, but the light source is not field-swapped like a replaceable-lamp landscape fixture. Actual performance depends on installation conditions, transformer loading, wire run length, and voltage drop.
Specifications
- Brand: Kichler
- Manufacturer part number: 16125AZT27
- Collection: Flare
- Product type: Integrated LED path light
- System voltage: 12V
- Operating voltage range: 9-15 VAC
- Delivered lumens: 294 lm
- Colour temperature: 2700K
- CRI: 80
- Input power: 4.3W
- Nominal wattage: 3W
- Finish: Textured Architectural Bronze
- Material: Aluminium
- Location rating: Wet
- Certification: cETLus
- Dimensions: 21 in H x 8 in dia. (533 mm H x 203 mm dia.)
- UPC: 783927473972
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.