168 lm LED path light · 12V · 2700K warm white · round tiered textured black · Kichler 16124BKT27
What this product is for
This low-voltage landscape path light is used to illuminate walkways, planting beds, patios, and garden edges with warm white 2700K light. The round tiered shade creates downward path lighting with a decorative light-leak effect suited to residential and light commercial exterior projects.
Use for
Use for 12V landscape lighting systems where you need approximately 168 lumens of warm white light, a 21 in (533 mm) fixture height, and a textured black finish that blends into darker landscape elements. Suitable for pathway runs, entry approaches, and accent lighting around softscape and hardscape features.
Avoid for
Avoid using this fixture where a replaceable lamp is required for future field servicing, or where line-voltage luminaires are specified. It is also not the right choice when higher-output area lighting or wide flood distribution is needed.
Best for
Best for contractors and landscape installers matching Kichler 12V systems and looking for a compact integrated LED path light with warm residential colour temperature. This style is commonly used where glare control and a softer pathway appearance are preferred over exposed-source fixtures.
Installed in
Installed in low-voltage outdoor lighting systems operating at 9 to 15V, typically with a landscape transformer, direct-burial low-voltage cable, and an in-ground stake. Common installations include front walks, side yards, garden borders, and outdoor living areas in wet-location environments.
Why this product exists
This fixture provides pathway illumination and visual definition after dark without the maintenance of a replaceable lamp system. Integrated LED construction, cast aluminium housing, and wet-location rating make it suitable for long-term exterior use in Canadian landscape applications.
Compared with similar products
Compared with taller or higher-lumen path lights, this 168 lm model is better suited to residential-scale paths and garden edges rather than broad area lighting. Compared with replaceable-lamp landscape fixtures, integrated LED reduces relamping but means the light source is not field-swappable. As a rule of thumb, path lights around 18 to 24 in (457 to 610 mm) high are commonly spaced to create an approximately 8 ft (2.4 m) pool of light; actual performance depends on layout, beam control, surrounding surfaces, and local installation conditions.
Specifications
- Brand: Kichler
- Manufacturer part number: 16124BKT27
- Product type: LED path light
- System voltage: 12V low voltage
- Operating voltage: 9 to 15V
- Light output: 168 lumens
- Colour temperature: 2700K warm white
- CRI: 80
- Wattage: 2W LED module
- Fixture size: 21 in H x 8 in dia. (533 mm H x 203 mm dia.)
- Finish: Textured black
- Material: Cast aluminium
- Light source: Integrated LED
- Rated life: 40,000 hours
- Location rating: Wet location
- Application: Walkways, gardens, patios, landscape borders
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.