182 lm LED path light · 12V · 3000K · round tiered aged bronze · Kichler 16124AGZ30
What this product is for
This low-voltage landscape path light is used to illuminate walkways, planting beds, garden paths, and perimeter edges with a warm 3000K light output. The round tiered top creates a decorative spread pattern while helping guide foot traffic in residential and light commercial outdoor spaces.
Use for
Use for 12V landscape lighting systems where you need approximately 182 lumens from an integrated LED fixture. It suits pathway runs, entry approaches, and garden borders where an aged bronze finish and a softer warm-white appearance fit the site design.
As a typical rule of thumb, path lights around 18 to 21 in high are commonly used to create comfortable wayfinding along walks and planting edges. Actual spacing and light coverage depend on layout, mounting height, surrounding surfaces, and beam distribution.
Avoid for
Avoid using this fixture where a replaceable lamp is required for future field servicing, or where higher-output area lighting is needed. It is not intended to replace flood lighting, security lighting, or line-voltage luminaires.
Best for
Best for contractors and landscape installers building 12V systems that need a decorative path-and-spread fixture with integrated LED performance, wet-location suitability, and a coordinated aged bronze finish.
Installed in
Installed in landscape beds, along sidewalks, beside stone or concrete walkways, around garden features, and in low-voltage outdoor lighting systems. Commonly paired with a landscape transformer sized for the total connected wattage plus typical design allowance.
For low-voltage runs, a common rule of thumb is to target no more than about 10% voltage drop. Wire size is typically selected by run length and total load. Actual performance depends on installation conditions, cable routing, transformer taps, and local electrical code.
Why this product exists
This fixture provides a finished architectural look for pathway lighting while reducing lamp replacement compared with older lamp-based path lights. It is designed for installers who want a compact 12V integrated LED option with warm-white output and a decorative tiered shade.
Compared with similar products
Compared with basic path lights, this model adds a round tiered top that creates a more decorative light effect. Compared with replaceable-lamp landscape fixtures, this integrated LED design reduces relamping but does not offer a field-changeable lamp. Compared with higher-output spread lights, its 182-lumen output is better suited to wayfinding and accent applications than broad area illumination.
Specifications
- Manufacturer part number: 16124AGZ30
- Brand: Kichler
- Product type: LED path light
- System voltage: 12V low voltage
- Operating voltage: 9-15V
- Light output: 182 lumens
- Colour temperature: 3000K
- Power: 2W
- Fixture height: 21 in (533 mm)
- Top diameter: 8 in (203 mm)
- Finish: Aged Bronze
- Construction: Cast aluminium
- Location rating: Wet rated
- Light source: Integrated LED
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.