- Edmonton Stock: 66
100/200/300 lm Landscape Wide Flood Light · 12V · 60° Beam · Bronze Finish · Kichler 16017AZT27
What this product is for
This 12V integrated LED landscape flood light is used to illuminate wider outdoor features where a narrow spot would be too concentrated. It provides a 60° wide flood beam with selectable Variable Lumen Output settings of 100, 200, or 300 lumens and a 2700K warm white colour temperature.
Use for
Use for landscape lighting on garden beds, shrubs, small trees, low walls, signage, and architectural surfaces that need broader light distribution. It is suited to low-voltage outdoor systems where electricians and landscape contractors want one fixture that can be adjusted on site for different brightness levels.
Avoid for
Avoid using this fixture where a tight beam is needed for long-throw spotlighting, flagpoles, or tall narrow features. It is also not the right choice if you need a replaceable lamp fixture rather than an integrated sealed LED design.
Best for
Best for installations that need beam spread flexibility with reduced fixture changes during aiming and commissioning. As a rule of thumb, a 60° flood is typically chosen for broader accent coverage at shorter setback distances compared with narrow spot fixtures. Actual performance depends on aiming, mounting location, surface reflectance, and local installation conditions.
Installed in
Installed in residential and light commercial landscape lighting systems, typically with a 12V low-voltage transformer and compatible outdoor cable. Suitable for Canadian exterior applications where a sealed fixture and surge protection are beneficial.
Why this product exists
This model exists to give contractors a compact accent fixture with wider beam control and field-selectable light output. Instead of changing to a different fixture for every application, the installer can choose the lumen level that best suits the feature being lit.
Compared with similar products
Compared with narrow spot or standard flood fixtures, this model spreads light more broadly at 60° and offers selectable output at 100, 200, or 300 lumens. Compared with replaceable-lamp landscape fixtures, this integrated LED design reduces lamp maintenance but does not use a field-replaceable lamp.
Specifications
- Manufacturer part number: 16017AZT27
- Brand: Kichler
- Product type: Landscape LED small accent / wide flood light
- System voltage: 12V
- Light output: 100 / 200 / 300 lm selectable
- Beam spread: 60° wide flood
- Colour temperature: 2700K
- Finish: Textured Architectural Bronze
- Construction: Aluminium
- LED type: Integrated, sealed LED
- Surge protection: 6,000V
- Approximate power at mid setting: 12.3W
- Beam width at 4 ft: approximately 4.6 ft (1.4 m)
- Beam width at 8 ft: approximately 9.2 ft (2.8 m)
- Application note: Stake sold separately where required by the installation method
Estimated beam coverage values are typical guidance from published photometrics and should be verified against the layout and aiming plan. Actual performance depends on installation conditions, transformer output, cable run, and voltage drop.
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.






