250 lm Path Light · 12V · 6 in Dome · Textured Black · Kichler 15870BKT30R
What this product is for
This low-voltage landscape path light is used to illuminate walkways, garden borders, and outdoor circulation areas with warm white 3000K light. The integrated LED light source and 6 in (152 mm) dome make it suitable where a compact path-and-spread fixture is preferred.
Use for
Use for residential landscape lighting, pathway edges, planting beds, and small outdoor gathering areas on 12V systems. It is commonly selected where electricians and landscape installers want a coordinated black finish and integrated LED source with reduced lamp maintenance.
Avoid for
Avoid using this fixture where a replaceable lamp platform is required for future field servicing, or where higher-output area lighting is needed. It is not intended to replace flood lighting or pole-mounted site lighting.
Best for
Best for low-voltage path lighting layouts that need warm white output, a compact 6 in shade, and a clean architectural look in textured black. Typical guidance for path lights of this style is to use them for defined walking routes and visual wayfinding rather than broad-area illumination.
Installed in
Installed in landscaped beds, along sidewalks, beside stone or concrete walkways, and around residential exterior features. This fixture operates on 12V landscape systems, and Kichler integrated LED landscape fixtures in this series are commonly listed for a 9V to 15V operating range depending on system design.
Why this product exists
This product exists for projects that need a compact decorative path light with integrated LED efficiency and warm white output without moving to a larger dome style. It helps reduce relamping compared with lamped fixtures, while maintaining a finished landscape appearance.
Compared with similar products
Compared with larger path lights, this 6 in (152 mm) dome is better suited where scale matters around tighter planting beds and narrower walkways. Compared with replaceable-lamp landscape fixtures, integrated LED designs typically reduce maintenance, but the light source is not field-swapped like a standard lamp. As a rule of thumb, path lights around 18 in (457 mm) high often create an approximately 8 ft (2.4 m) pool of light, but actual performance depends on spacing, optics, surrounding surfaces, and voltage drop.
Specifications
- Brand: Kichler
- Manufacturer part number: 15870BKT30R
- Product type: Low-voltage LED path and spread light
- Fixture style: Dome path light
- Light output: approximately 250 lm
- Colour temperature: 3000K
- Voltage: 12V low voltage
- Operating range: 9V to 15V typical for this Kichler integrated LED landscape family
- Power: 3W
- Finish: Textured Black
- Dome size: 6.25 in diameter (approximately 159 mm)
- Fixture height: 22 in (approximately 559 mm)
- Application: Pathways, gardens, landscape borders
- Installation note: Actual performance depends on transformer sizing, wire length, voltage drop, layout, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.