168 lm LED path light 12V · 2700K warm white · pierced dome, textured architectural bronze · Kichler 15857AZT27R
What this product is for
This low-voltage landscape path light is used to illuminate walkways, planting beds, and outdoor circulation areas with warm 2700K light. The pierced dome creates a decorative light pattern while directing light downward for path and garden applications.
Use for
Use for residential pathways, garden edges, front entries, patios, and landscaped areas on 12V systems. It is suitable for wet locations and operates on approximately 9-15V in low-voltage landscape lighting installations.
Avoid for
Avoid where a replaceable lamp fixture is required for future lamp-only servicing, or where higher-output area lighting is needed. This is an integrated LED fixture, so it is not intended for applications that require field lamp changes.
Best for
Best for decorative path lighting where warm white output, a bronze finish, and patterned light spill are part of the design intent. It fits projects that need a more architectural look than a basic dome path light.
Installed in
Typically installed along sidewalks, stone paths, mulch beds, and landscape borders in homes, multi-residential properties, and light commercial exterior spaces. With an overall height of about 22.25 in (565 mm) and a diameter of about 6.3 in (160 mm), it suits standard path-light spacing layouts.
Why this product exists
This fixture provides low-voltage pathway illumination with a decorative pierced dome effect in a compact integrated LED format. For planning purposes, path lights around this size are typically used to create comfortable wayfinding and accent lighting rather than broad area coverage. Actual lighting results depend on spacing, mounting position, surrounding surfaces, transformer loading, voltage drop, and local electrical code.
Compared with similar products
Compared with simpler path lights, this model adds a patterned dome design and warm 2700K output for a more residential appearance. Compared with replaceable-lamp landscape fixtures, integrated LED reduces lamp maintenance but does not offer lamp-only replacement. On longer low-voltage runs, typical trade practice is to manage voltage drop and keep system loss to about 10% or less where practical.
Specifications
- Brand: Kichler
- Manufacturer part number: 15857AZT27R
- Product type: Low-voltage LED path light
- Finish: Textured Architectural Bronze
- Colour temperature: 2700K warm white
- Light output: 168 lumens
- Power: 2 W
- Voltage: 12V low voltage
- Operating voltage range: 9-15V
- CRI: 80
- Mounting/application: Landscape path and spread lighting
- Location rating: Wet rated
- Light source: Integrated LED
- Overall height: 22.25 in (565 mm)
- Diameter: 6.3 in (160 mm)
- Material: Cast aluminium
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.