250 lm Path Light · 12V · 3000K · Centre-Mount Conical Shade · Kichler 15826BKT30R
What this product is for
This 12V low-voltage landscape path light is used to illuminate walkways, planting beds, garden edges, and outdoor circulation areas. The centre-mount conical shade is designed to spread light outward while helping reduce direct glare at eye level.
Use for
Use for pathway lighting, landscape borders, patio approaches, and accent lighting where a warm 3000K appearance is preferred. It is commonly used in residential installations and light commercial exterior projects that run on 12V landscape lighting systems.
Avoid for
Avoid using this fixture where a replaceable lamp is required for maintenance standardization, or where line-voltage 120V fixtures are specified. It is also not intended to function as a flood light or area light for large open spaces.
Best for
Best for contractors and installers who need a compact integrated LED path light with a broad light pattern, textured black finish, and cast aluminium housing. It suits projects where fixture spacing, appearance, and low-voltage compatibility matter more than high-output area coverage.
Installed in
Installed in soil or landscaped beds using the included 8 in (203 mm) in-ground stake. The fixture is 22.25 in high (565 mm) with a 6 in diameter shade (152 mm), making it suitable for standard path-lighting layouts beside walks, drive approaches, and garden paths.
Why this product exists
This fixture provides a clean architectural path-lighting option for 12V systems where installers want integrated LED performance, wet-location suitability, and a centre-mount design for maximum light spread. It helps deliver consistent pathway illumination without the lamp changes associated with replaceable-bulb fixtures.
Compared with similar products
Compared with smaller accent fixtures, this path light is built specifically for pedestrian wayfinding and landscape edge lighting. Compared with replaceable-lamp path lights, the integrated LED reduces lamp maintenance but does not offer field lamp changes. As a typical rule of thumb, path lights around 18 in to 22 in (457 to 559 mm) high are commonly used to create comfortable walkway illumination over several feet of spacing, but actual coverage depends on layout, mounting position, transformer loading, wire size, and voltage drop.
For low-voltage layout planning, Kichler recommends product installation with 10 or 12 gauge wire and using an 80% load / 20% overhead approach for transformer loading. Actual performance depends on installation conditions, wire run length, insulation, layout, and local electrical code.
Specifications
- Brand: Kichler
- Manufacturer part number: 15826BKT30R
- Product type: Integrated LED landscape path light
- System voltage: 12V
- Input voltage range: 9-15V AC/DC
- Light output: 250 lm
- Power: 3 W / 4.5 VA
- Colour temperature: 3000K
- Efficacy: 83 lm/W
- Finish: Textured Black
- Material: Cast aluminium
- Location rating: Wet
- Dimensions: 22.25 in H x 6 in dia. (565 mm H x 152 mm dia.)
- Weight: 1.20 lb (0.544 kg)
- Lead wire: 50 in usable #18-2 SPT-1-W leads (1.27 m)
- Included accessories: 8 in slotted in-ground stake (203 mm), cable connector, and 2 gel-filled wire nuts
- Optional accessories: Surface Mounting Flange 15601, Surface Mounting Bracket 15607, 14 in stake 15576, Power Post 15276
- Listing: cETLus, UL 1838, CSA C22.2 No. 250.7
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.