294 lm LED path light · 12V · centre-mount spread · textured black · Kichler 15826BKT27R
What this product is for
This low-voltage landscape path light is used to illuminate walkways, garden edges, planting beds, and similar outdoor pedestrian areas. It uses an integrated 2700K LED light source and is designed for 9-15V landscape lighting systems.
Use for
Use for residential pathways, front entries, garden paths, and light commercial landscape applications where a warm white appearance and broad path spread are preferred. The centre-mount shade design is intended to provide a more even light pattern around the fixture.
Avoid for
Avoid using this fixture where a replaceable lamp is required for maintenance standardization, or where higher-output area lighting is needed. It is not a substitute for flood lighting, security lighting, or line-voltage site lighting.
Best for
Best for contractors and landscape installers matching existing Kichler low-voltage systems or specifying a warm 2700K path light in a textured black finish. It suits projects where fixture appearance, controlled path illumination, and wet-location suitability matter.
Installed in
Typically installed in soil or landscaped beds beside sidewalks, stone paths, driveways, and entry approaches. The fixture measures 22.25 in H x 6 in dia. (approximately 565 mm H x 152 mm dia.), which helps raise the light source above low ground cover while keeping the fixture proportionate to residential paths.
Why this product exists
This model provides a finished architectural path-light option for 12V landscape systems where electricians and landscape contractors want integrated LED operation, warm white output, and a broad spread from a centre-mount shade. Compared with older lamped fixtures, integrated LED reduces routine relamping.
Compared with similar products
Compared with side-mount or more directional path lights, this centre-mount style is intended for wider, more even path illumination. At 294 lumens, it is suited to accent and pathway lighting rather than area lighting. As a rule of thumb, path lights around this height are commonly spaced to create overlapping pools of light rather than continuous uniform illumination. Actual results depend on spacing, beam distribution, surrounding surfaces, and transformer voltage at the fixture.
Specifications
- Brand: Kichler
- Manufacturer part number: 15826BKT27R
- Product type: LED path light
- System voltage: 12V low voltage
- Operating voltage: 9-15V
- Light source: Integrated LED
- Delivered output: 294 lm
- Wattage: 3 W
- Colour temperature: 2700K warm white
- Finish: Textured black
- Mounting/design: Centre-mount path light
- Location rating: Wet rated
- Dimensions: 22.25 in H x 6 in dia. (approximately 565 mm H x 152 mm dia.)
Typical low-voltage guidance: for longer cable runs, voltage drop should be checked during layout and transformer sizing. Actual performance depends on installation conditions, cable length, load, layout, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.