294 lm Path Light · 12V · 2700K Centre-Mount Bronze · Kichler 15826AZT27R
What this product is for
This Kichler low-voltage path light is used to illuminate walkways, garden edges, planting beds, and other pedestrian routes in residential and light commercial landscape lighting systems. It combines an integrated 2700K warm-white LED source with a centre-mount shade design intended to distribute light around the fixture.
Use for
Use for 12V landscape lighting runs where you want warm pathway illumination, a coordinated bronze finish, and an integrated LED fixture with low maintenance. It is suitable for paths, entry approaches, garden borders, and similar outdoor locations rated for wet conditions.
Avoid for
Avoid using this fixture where a replaceable-lamp path light is specifically required for future lamp-change flexibility, or where higher-output area lighting is needed. It is not intended to replace flood, spot, or security lighting.
Best for
Best for contractors and homeowners building a coordinated Kichler 12V landscape system with warm residential colour temperature and a clean centre-mount look. It is a practical choice where even path illumination matters more than accent beam control.
Installed in
Typically installed in soil or landscaped areas beside sidewalks, stone paths, mulch beds, and garden transitions as part of a 9-15V low-voltage outdoor lighting system. With an overall size of 22.25 in H x 6 in dia. (approximately 565 mm H x 152 mm dia.), it fits common path-light layouts.
Why this product exists
This fixture exists to provide glare-controlled, low-level pathway lighting from a compact 3W integrated LED source while matching other Kichler landscape components. As a rule of thumb, path lights in this class are commonly spaced to create overlapping pools of light for safer walking routes, but actual spacing depends on site layout, fixture height, beam distribution, and desired brightness.
Compared with similar products
Compared with spot lights or flood lights, this path light is designed for pedestrian guidance and softer ambient landscape illumination. Compared with replaceable-lamp low-voltage fixtures, the integrated LED design reduces lamp replacement but does not offer the same field-service lamp flexibility. Compared with side-mount path lights, the centre-mount configuration is intended to provide a more symmetrical light spread.
Specifications
- Manufacturer: Kichler
- Manufacturer part number: 15826AZT27R
- Product type: Low-voltage integrated LED path light
- Product family: Centre Mount LED Path Light
- System voltage: 12V
- Operating voltage: 9-15V
- Light source: Integrated LED
- Power: 3W
- Delivered light output: 294 lm
- Colour temperature: 2700K
- Finish: Textured Architectural Bronze
- Location rating: Wet rated
- Dimensions: 22.25 in H x 6 in dia. (approximately 565 mm H x 152 mm dia.)
Typical low-voltage design guidance: size the transformer at approximately 125% of connected fixture wattage and manage voltage drop on longer runs. Actual performance depends on cable length, conductor size, tap selection, layout, and local electrical code.
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.